Deyva, the winged baby Dragon
$2.89 Deyva, the winged baby Dragon
3D
Published 2024-02-22T07:07:02+00:00
Attention:
accompany the wing and ball during the first joint.
The brim is mandatory. I repeat: mandatory, as is the zhop. I remind you to watch the tutorial if necessary.
https://www.patreon.com/posts/z-hop-91398118
Printed at 100% and 90%. I do not recommend printing them smaller than 80%. Be patient.
I hope you can have fun and enjoy this lovely dragon.
Careful not to break the wings and get hurt, some filaments create more thickness!
ZHOP at 0,8 is raccomanded.
Good calibration, infill and retraction is necessary for a great result.
Functional print sizes range from 100% to 80%; smaller ones may break or have printing errors.
NOZZLE: 0,4 mm.
LAYER: 0.16
OUTER WALLS: 3
INFILL: 15%
SUPPORTS: NO
Z-HOP: 0,8
| Date published | 22/02/2024 |
| Price | $2.89 |
| Supporto Gratuito | YES |