Drone Frame
Drone Frame
Published 2018-07-24T16:40:39+00:00
I have always dreamed of getting a drone. I was never able to get one because they were a bit too expensive. So I designed my own drone frame. It is designed so that it could have all the electrical components fit in easily and so that it would be very simple to make.
Underneath the hood, there will be a reciever, which will have wires extending out to the 4 arms. These wires will then connect to the motors on the ends of each arm. A fifth wire will then connect to an antenna, which will stick out of a hole in the hood so that I can maximize the range of my drone. And to power the whole drone, a battery will be stored in the compartment at the bottom and will connect to the reciever.
- By Vihaan Jain,
Age 10
ok
Date published | 24/07/2018 |
Tempo per farlo | 400 - 800 Minuti |
Quantità di filamento | 38 |
Dimensioni | 210 124 31 |
Tecnologia | FDM |
Complessità | Easy |