Finnex HOB Breeder Refugium Media Basket
Finnex HOB Breeder Refugium Media Basket
3D
Published 2020-07-29T12:39:07+00:00
Edit, made a slight change, added notches in the two corners because it was a tight fit. Thats where the dividers slide into. So I made some space incase they may be positioned slightly one war on another from one HOB Refuge to another.
Please note, this is my very first attempt at designing something in CAD. I spent the week trying and watching vids on various CAD software. Tried multiple software and finally stuck with Fusion360. This is the 4th version of this basket.
This is a media basket for the Finnex External Refugium Breeder Hang-On Box" Dimensions: 10.25" x 5.5 x 5. I use mine as a fuge and decided I didn't like the removeable partitions it comes with. This basket make its easy to put bio-media and filter floss into the fuge without having to dig it all out. Now you can just lift out the entire basket.
So more water travels thru more of the media I put the outflow holes as close to the bottom as I could. Also added two overflow notches on the top incase your filter media gets clogged it will overflow into the next chamber instead of out of the tank and onto your floor.
Printed in PLA. Plan on doing one in PETG next print.
This is like version 5 of this. Final version is on the printer right now with 3 hours left. Once its finished I'll upload more pictures. I did upload 1 pic of the first version inside the HAP refugium.
My settings below
.25 layer height
.22 initial layer height
15% infill (grid)
50 speed
50 infill speed
25 wall speed
Support, everywhere, zigzag (though im not really sure support is needed?)
| Date published | 29/07/2020 |
| Tempo per farlo | 660 - Minuti |
