FlashForge Creator Pro 2 IDEX Heatbed Covers
FlashForge Creator Pro 2 IDEX Heatbed Covers
Published 2021-06-03T08:23:23+00:00
Upgrades for the FlashForge Creator Pro 1 and FlashForge Creator Pro 2 IDEX. Models were remixed in AutoDesk Fusion360, printed in carbon fiber polycarbonate, and installed on a Creator Pro 2 IDEX.
These upgrades shield the high voltage heatbed pcb from external metal contacts (i.e. a freefalling bolt while the printer is plugged in). These features should be included with the printer from the factory.
The Heatbed PCB Cover was test fitted on a FFCP2 IDEX. It should fit the FFCP1. For install, simply slide the printed part across the board edges.
Lower Cable Cover fits FFCP2 IDEX only. Technically the lower cover will fit the FFCP1, but the lower cover will not cover the entire area across the X-axis. For install, plug the hole with the cover. Wires pass through the cover. You can add nylon sleeving to the heatbed wiring for extra protection.
Print with high temperature material.
Date published | 03/06/2021 |
Supporto Gratuito | YES |