KS3SHP11 - Sky Islands Barge Tug
$3.00 KS3SHP11 - Sky Islands Barge Tug
Published 2022-06-09T09:32:30+00:00
The Barge Tug was sculpted by Colin Christenson for the Kickstarter. It was one of the early stretch goals and we knew it would be well loved. Since we showed it off during the campaign, we added some additional cargo loads for more versatility.
The Barge features multiple levels and connects with Dragonbite clips. The interior pilot house roof is removeable for additional access.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 09/06/2022 |
Price | $3.00 |
Supporto Gratuito | YES |