Mini GT LB Lamborghini Huracan Display Base
Mini GT LB Lamborghini Huracan Display Base
3D
Published 2022-02-25T09:42:23+00:00
Description
A base for Mini GT LB Lamborghini Huracan, it should work with all Mini GT LB Lamborghini Huracan. I'm not sure will it work on the LB Silhoutte Huracan, I haven't tested it with that variant.
There is also a Hotwheels variant of LB Huracan but I don't have that car so I can't make accurate holes to fit that specific model.
If you have the Hotwheels variant, I could make another base to fit it. I need the length and width of the car base as shown here: https://imgur.com/5T6mb2L
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Name plate (NamePlateAssem.STL)
2) Base (BaseV2.STL)
3) Base back wall (BoxBackAssem.STL and BoxBackAssemGeneric.STL)
For alternate base back wall design, the one I made for Mini GT LB Nissan GT-R is usable too: Here
Base Back Wall Variant
There are 2 variants of Base back wall, the one in my pictures are "BoxBackAssem".
The difference for each base are:
BoxBackAssem:
LB Works logo, LB Performance logo and its brand pattern with the top right corner has "Lamborghini Huracan" written on it.
BoxBackAssemGeneric:
LB Works logo, LB Performance and its brand pattern without "Lamborghini Huracan" written on it.
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BoxBackAssem2NFS":
1) Start (Background colour, mine is in white)
2) Layer 10 (LB stripes pattern outerline color, mine is in black)
3) Layer 15 (LB stripes colour, mine is in red)
4) Layer 20 ("LB works", "LB performance" and "Lamborghini Huracan" lettering outline, mine is in black)
5) Layer 25 ("LB works", "LB performance" and "Lamborghini Huracan" lettering, mine is in white)
6) Layer 30 (LB Performance star colour, mine is in red)
Filament change layer for colours on "NamePlateAssem":
1) Start (Background colour, mine in white)
2) Layer 6 (LB stripes pattern outerline color, mine is in black)
3) Layer 11 (LB stripes colour, mine is in red)
4) Layer 16 ("LB works", "LB performance" and "Lamborghini Huracan" lettering outline, mine is in black)
5) Layer 21 ("LB works", "LB performance" and "Lamborghini Huracan" lettering, mine is in white)
6) Layer 26 (LB Performance star colour, mine is in red)
Assembly
The car is tied by wires through the hole in the base
Back plate and name plate should slide in nicely into the display base.
Others
I have not test both the other base wall design but it should works fine.
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
| Date published | 25/02/2022 |
| Supporto Gratuito | YES |