A mixer/agitator for airbrush paint bottle.
I made the top modular so we can change to different size bottle.
I used an old 12mm fan and clipped a magnet onto one of the blades to make it vibrates.
There's 2 version for the base. One with a 21x15mm rocker holder and the other is a 15x10mm rocker.
Everything is powered by a 12v power adaptor(i used an old HDD power adaptor).
There is also a holder for a potentiometer if you want to control the vibration effects.
- 12mm PC fan
- 4x compression spring - 9mm*35mm
- 21x15mm or 15x10mm rocker switch
- Solderless 2.1mm Female Terminal Block DC Power
- 4x 50mm m3 screws and nuts
Tip: Because of the heavy vibration, you will need to weight the base down or it will start trashing all around the table.
Find a heavy plate that you can screw onto the base.
Or maybe put a few heavy bags of screws or nuts on the base to weight it down.