Modular Toy Robot Arm
Modular Toy Robot Arm
3D
Published 2020-08-10T22:18:27+00:00 • Remixed from Simple Toy Robot Arm 5DoF
Following on from my first toy robot arm, this one is a bit more modular and can be used as a toy, desk lamp, microphone or camera stand via swappable add-on components.
More components to come. (OpenSCAD Source)
Print at 0.2mm layer height and ensure there is a 1-layer gap in the ring gears after slicing. Use a sharp edge to de-laminate the 1-layer gaps (listen for the "crack"). Turn the knob just a little to get the gears moving, working back and forth gently. A final tap with a rubber mallet should free everything up. Then apply petroleum jelly or lubricant of choice to gears.
| Date published | 10/08/2020 |
| Supporto Gratuito | YES |