Take a sneak peek to the MDS System in its first stages in the video above

 If you are interested in the MDS Race System take a look to the next video

Old Price: 16.00

Here you will find all MyDigitalSlot straight track parts, including single-lane (SL) and dual-lane (DL) parts, but not only; You will also find here the side accessories for those track parts, Pianos and P-Walls ;)

These track parts can work in both analog / digital systems, and can be compatilble with other existing commercial track parts using the right adaptors.

If you want it all, the All Curves Pack and Lane-Changers is what you need. If you plan to buy these 3 publications, ask me for a discount and I will create it for you if you can't wait until I publish a "mega-combo pack" with these 3 publications.

Of course, you will need to add copper tape to each track part. Please look for a double-side conductive one, so you can use it also to "bridge" some connections

You will find the list of STLs included, the same than their weight and fast printing time at the end of this publication!

To complete the connection system you will also need (Included):
- MDS_TRACK_CLIP_Standard (To connect track parts)
- MDS_TRACK_CLIP_Pianos (To interconnect pianos)
- MDS_TRACK_CLIP_Lanes (To fix straight lanes in parallel)
- MDS_TRACK_CLIP_IR-holder (To hold IR lights and sensors)

They are compatible with the next adaptors (NOT INCLUDED):
- MDS_TRACK_ADAP_SCA_CLASSIC_SL_STR45_FEMALE
- MDS_TRACK_ADAP_SCA_CLASSIC_SL_STR45_MALE
- MDS_TRACK_ADAP_SCA_CLASSIC_DL_STR45
- MDS_TRACK_ADAP_SCA_SPORT_SL_STR45_ROUND
- MDS_TRACK_ADAP_SCA_SPORT_SL_STR45_SQUARE
- MDS_TRACK_ADAP_SCA_SPORT_DL_STR45
- MDS_TRACK_ADAP_SCX_GREY_SL_STR45
- MDS_TRACK_ADAP_SCX_GREY_DL_STR45

You will find attached a table with all the common track parts weights, needed bed sizes and printing times. Introducing the quantity of each track part you should be able to get the total weight and time to print.

MyDigitalSlot System, more than a track

This is part of a more complete work, a whole car racing Digital Slot System, including the track parts, controllers, car chassis, electronics and bodies. The same way various digital accessories like "Info Screens" with cars and race information, synchronized start lights system, RGB lighting, and probably an app and HDMI output will be available.

The main idea is to be able to print, build and use a full RC Car Slot Digital Racing System which is independent from market typical trades. Anyway you can use the different parts of the system in many ways.

The main features of MyDigitalSlot System are:

- Lap count
- Fuel and Health systems
- Racing system without base controller, just with cars and their controllers
- Race configuration and invitation system just with your controller!
- Stop and Go system for race starts and accidents
- Speed Cap system for low health or fuel

- Wireless and rechargable controllers
- Enter / Exit Pit Lane detection, you need to stop there to restore full fuel / health levels

- Cars can run in both directions in the same lane
- Cars with full configurable lights, including dimming rear/brake lights, Left and Right Blinkers and Front Lights
- Cars can control various servos, a XYZ gyro, IR lights and sensors and the motor driver

More features are coming, but I will need a great bunch of feedback, I hope yours too, to take the whole system to a more profesional, next level.

System Versatility

You can use the track parts to build and drive your analog or digital cars, you can mix the parts with older or newer Scalextric parts using transition/adaptor parts. You can also use the MyDigitalSlot cars and controllers in those commercial tracks, but the "digital" system accessories of those commercial tracks probably won't work.

The electronics involved in the controllers, cars and digital track parts are quite simple and easy to source, like cheap arduinos, resistors, diodes, leds, RGB digital leds, pots and a few more things.

I have made the car and "lane-changers" work in two different modes, one would be compatible with "mechanical" lane-changers like in Scalextric Digital System, WOS or Advance.
The other mode would be the "InfraRed" mode, in which the "lane-changers" will move when they receive IR light from a car. In this case, you won't need the "line-changer actuator" in the car but you will need electronics under each lane-changer track part, specially the "sensors" and the "actuator".

There is a very good thing about the InfraRed lane-changers... You can use both mechanical and IR systems simultaneously, I mean, one car can change lane mechanically and the next one could use the IR led to change lane.

You CAN'T use "mechanical lane-changer cars" with old Scalextric track parts (black) but you can use "IR lane-changer cars" and complete your track with all those old track parts you had around there from many years ago.

Printing a big track could take many many plastic (various KG) and hundreds of hours of 3D printing, so this InfraRed lane-changer system in combination with your old black track parts could be the most economically interesting solution from my point of view.

If you give it a try to MyDigitalSlot you will be welcomed to my Discord Server to ask, show or suggest any change to this DIY 3D Printable Digital Slot System, but you can also use the comments of this publication if it makes sense.

LIST OF INCLUDED PARTS

BLACK MAIN TRACK PARTS:    Bed Size   Weight   Time
MDS_TRACK_STR_SL_360      362x80      50        120
MDS_TRACK_STR_SL_180      182x80      27        65
MDS_TRACK_STR_SL_90        92x80        14        35
MDS_TRACK_STR_SL_45        47x80        9          23
MDS_TRACK_STR_DL_360      362x160    97        225
MDS_TRACK_STR_DL_180      182x160    52        123
MDS_TRACK_STR_DL_90        92x160      28        66
MDS_TRACK_STR_DL_45        47x160     18         45

WHITE PIANO PARTS:                       Bed Size   Weight   Time
MDS_TRACK_PIANO_STR_45             45x43        4.1      10
MDS_TRACK_PIANO_STR_90             90x50        7.4      18
MDS_TRACK_PIANO_STR_90_Left      90x50        5.9      15
MDS_TRACK_PIANO_STR_90_Right    90x50        5.9      15
MDS_TRACK_PIANO_STR_180           180x50       14       34
MDS_TRACK_PIANO_STR_180_Left    180x50      12.5     30
MDS_TRACK_PIANO_STR_180_Right  180x50      12.5     30
MDS_TRACK_PIANO_STR_270           270x50      20.5     49
MDS_TRACK_PIANO_STR_360           360x50      27.1     65

GRAY WALL PARTS:                           Bed Size   Weight   Time  
MDS_TRACK_P-WALL_STR_90              90x30     10.4       31
MDS_TRACK_P-WALL_STR_90_Left       90x30     8.7        25
MDS_TRACK_P-WALL_STR_90_Right     90x30     8.7        25
MDS_TRACK_P-WALL_STR_180            180x30   20.1       57