NAS ITX PC Case with stackable expansions
NAS ITX PC Case with stackable expansions
3D
Published 2024-01-30T12:25:21+00:00
MASS is a compact 3D printed NAS enclosure with expandable bays support up to 13 drives.
Instructions
MASS_Instructions.pdf (v1.1)
Enjoy, Haydn Bao
Features:
Modular Body
Stackable Drive expansion! Up to 10x 3.5” + 3x 2.5” drives.
Fully Printable
Hello unlimited colors, spare parts, instant digital delivery and downloadable updates.
Vertical design
Minimal foot print with straight up airflow.
Official MODs
Plus optional mounts.
Simple assembly
consolidated parts and 1 screw type for all.
Clean and strong
Prints on even budget 3D printers.
Specifications:
- Drive Bays: 4x3.5" + 3x2.5"
- PSU: SFX, SFX-L
- Fans: 3x 140mm or 120mm
- CPU Cooler: 55mm tall
- Printer Requirements: Min. Bed 200x200, 240°C Nozzle
- Core Size (APU): 203x199x151mm 6.1L
- Bay Module: 199x150x150mm 4.5L
- Motherboard: ITX
- Material: 1-2kg PETG
- PCI-E Slot: NA*
- Handles: NA*
- Display Mod: NA*
- Additional 2.5" Bays: NA*
- Mechanical PBT: NA*
For a more advanced MASS see MASS Premium.
Required to complete
Screws: M3x20 (40pcs) - Link
Power Button: Ø16mm - Link
FAQ
▶How much does it cost to print?
1-2kg of filament. MASS is tested on generic PETG. You can typically find 1kg rolls for $13/kg each (Link), $12/kg if you buy 4 (Link), $10/kg if you buy 10 (Link).
▶Premium vs Free difference?
Premium has PCIE slot support, holds 5 drive per caddy, supports up to 13 drives, has handles, extra 2.5” drive adapters, Flex PSU bracket, addon Fan modules and ongoing updates. It supports development of more awesome designs.
▶Can Free version use premium modules?
No. MASS Free Version was the original model without PCIE slot, making it slimmer by 11mm on the width of the tower, and thus not compatible with the PCIE equipped Premium model.
MASS Free is still a potent enclosure with 4x3.5” bay support and can technically stack up to 8 drive bays using M.2 HBA.
▶Is MASS durable?
MASS is built with an intimate understanding of the non-anisotropic strength properties of FDM. The parts are appropriately designed to overcome layer splitting issues by orientation and print settings. MASS development is committed also to ongoing improvement to ensure it is a durable and reliable option for your NAS setup.
▶How to connect more than 4 drives?
To expand the beyond the 4 sata ports on most ITX motherboards, you can install a Low profile PCIE SATA card on the premium model. You can also use an m.2 SATA controller to add a few more.
Please Instructions manual for step by step slicing guide.
Settings for PETG with 0.4mm nozzle
Layer Height: 0.2
Cooling Fan: 25% (Min and Max)
Infill: 100% rectilinear
Walls: 5
Nozzle Temp: 250°C
Bed temp: 90°C
Infill/Perimeter overlap: 25%
| Date published | 30/01/2024 |
| Tempo per farlo | 2160 - Minuti |
| Quantità di filamento | 2000 |
| Dimensioni | 200x200x200 |
| Supporto Gratuito | YES |