Pinchy The Belt Hanger
Pinchy The Belt Hanger
3D
Published 2020-11-26T14:48:02+00:00
Pinchy The Belt Hanger. Thumb and index finger pinching objects gave me the inspiration to design this shape for organizing my belts.
It has 6 slots, because why not. I own only 4 belts, a little more of a cargo pants guy.
Opening part is narrower than the rear part, giving it easy rest without having to tuck it in hard while also staying firm in its place.
Including the FreeCAD design file in case you need more or less slots with narrower/wider gaps. Just modify pattern repetition count to adjust slot count after changing the width.
No supports needed.
Reduce fan speed or increase temperature for better adhesion between layers. Do not tighten very hard at screw holes or use strong double sided tape.
Was printed in about 4 hours with a CoreXY printer at 0.15mm height. Your mileage may vary.
| Date published | 26/11/2020 |
| Supporto Gratuito | YES |
