Piranhaz are a really small, easy and fun print with a big bite for their size... when you print some please post images of what your Piranhaz are feeding on!
At standard scale Piranhaz measure just 42mm long and 9mm high. They print quickly and should come off the build plate ready to bite and clip / peg things closed. They are fun and practical as well as being a great gift.
Piranhaz can be scaled up (not down as that will cause the internal clearances to reduce and the print to fuse). Print in your choice of color... and, being such a small print (approx. 6gm filament) you'll want to print lots!
A word of caution: Some slicing apps and/or less advanced machines will find the clearances and bridging challenging. Piranhaz have been test printed approx. 100 times on several different machines with no issues other than a small amount of sticking / fusing that could be readily broken free. However, it is possible that some machines will struggle to print Piranhaz with free moving jaws.
Pirahnaz work on a similar (but not the same) way as my popular Sharkz design... but they are half the size at standard scale. Great fun small prints. Everyone that sees them will want one!
Two .stl's have been provided. One is just for fun and the other a key fob version.
Please refer to the print instructions and images for additional information.
Note: If you like this check out the rest of my fun and practical designs.
Also check out my other similar designs:
'Fish Fossilz' https://www.myminifactory.com/object/30368