Pyramid Dice Box
$0.99 Pyramid Dice Box
3D
Published 2020-11-30T16:11:57+00:00
Hi All! This is a dice box I've been working on for a while.
It's a display tray for your dice, a carrying case and a dice tray when needed! Post printing needs only a few magnets for the cover and, optionally, felt for the inner tray if you desire.
Inner tray you ask? Yes! As a case it can carry a set of average dice well enough (D4 to D20 and a percent die) and when ready the inner dice holder may be removed so you can use the base as a dice rolling tray!
The clearances were designed with FDM printing in mind for the print, however SLA would work fine, just expect a bit more clearance.
Note: Pictures may be of a slightly older model, but is representative of the style.
Other than that, it's a well designed lil dice pyramid! Pointy!
Note: Additional Material:
- 8 X 3 mm magenets (with glue)
- Optional: Felt of your choice (~1.5mm thick)
- Optional: Foam of your choice (~2mm thick)
I've provided links to items I've used above (Note: They are in bulk!), these are affiliate links and you do not have to go get the items through them, it is appreciated if you decide to though!
I've printed this several times on my CR10S-Pro with a Hemera hotend. The high level settings are below:
- Material: PLA
- Layer Height: 0.32mm (0.4mm nozzle)
- Infill: 15%
- Shell Count: 3
- Speed: 80mm/s
- Support: None needed unless printing the top piece in full.
| Date published | 30/11/2020 |
| Price | $0.99 |
| Tempo per farlo | 17 - 18 Minuti |
| Quantità di filamento | 125 |
| Dimensioni | ~103mm x ~103mm |