SCX24 LCG 4-Link Servo Mount for A06CLS
SCX24 LCG 4-Link Servo Mount for A06CLS
3D
Published 2023-05-23T15:08:17+00:00
UPDATE: Added v3, which is intended for use with shorter front-end trucks (e.g. Deadbolt/Betty). It has the servo and link mount points shifted forward by 2mm to allow use of longer links. The mount points are also 2mm wider (1mm per side) to reduce the angle and avoid binding of the upper links.
This is a LCG, 4-link servo mount for use with the AGFRC A06CLS. It places the servo directly on top of the axle and centered front to back.
Use the appropriate upper links for your 4-link setup. With my +10mm stretched SCX24, I use the 36.5mm link available here: https://www.myminifactory.com/object/3d-print-scx24-custom-length-straight-links-163331
I also use this with my custom servo horn: https://www.myminifactory.com/object/3d-print-agfrc-a06cls-extended-servo-horn-181797
PETG recommended
0.2 layer height recommended
| Date published | 23/05/2023 |
Works great. Thanks for sharing.