Stylish soap dish with lid
Stylish soap dish with lid
Published 2021-02-15T09:11:40+00:00
This is a beautiful soap dish with a voronoi-style inlay and a engraved lid which makes it a complete set which is also a good companion for travelling.
My work is free and if you like the design, please consider supporting me by making a donation via PayPal.Me (Click here). Thank you very much in advance.
Sample print shown in images was made using Cura 4.8.0 as slicer and an Artillery Sidewinder X1.
Settings used in Cura:
First Layer: 0.20mm
Other Layers: 0.25mm
Infill: 20%
Speed: 65 mm/s
Support Structure: Yes
Brim: Yes, 8 lines in total
Material: PLA (200C for nozzle and 65C for printer bed)
Make sure to level your printer bed correctly before starting this print. The surface/bed of the bottom piece and the lid should be printed face down, e.g. lying on the printer bed. This will reduce print time and use of filament.
If you want a smoother finish, you can rotate the bottom and top part by 180 degrees (so that the flat sides will not lay on printer bed) and enable the ironing function. Looks great!
Date published | 15/02/2021 |
Dimensioni | 90x120x56 |