Thoren's GIAFT Puzzle Box
Thoren's GIAFT Puzzle Box
3D
Published 2024-04-03T17:04:54+00:00
Thoren's GIAFT Puzzle Box (Easy/Novice Level)
This Puzzle Box contains 3 compartments of various sizes. It requires 21 Actions to access all 3 hidden compartments. The Puzzle Box can be easily returned to its original "mysterious" beginnings. 4 STLs containing all 28 pieces must be assembled to whom the Puzzle's secrets will be revealed.
This build requires 14 2mmx6mm Neodymium Magnets, 36 metres of Filament, and around 5hrs Print Time.
STLs 3 and 4 can be Printed a different color to make hidden buttons and walls visible and puzzle Easy Level.
YouTube Video, Thoren's GIAFT Puzzle Box, available for assemble instructions followed by Solution, followed by reverting to its "mysterious" beginnings.
STLs (Usage and Completion Time based in Bambu A1 mini)
PuzzleBox_1.stl (2 pieces) - .4mm Nozzle .20mm Layer Height or smaller, Require Tree Supports for Screw Holes, overhang and side rails 20 Angle - Filament 15m 44g, 1:37min
PuzzleBox_2.stl (2 pieces) - .4mm Nozzle .20mm Layer Height or smaller, No Supports - Filament 12m 37g, 1hr:6min
PuzzleBox_3.stl (13 pieces) - .4mm Nozzle .12mm Layer Height or smaller, No Supports - Filament 5.5m 16.5g, 1hr:44min
PuzzleBox_4.stl (11 pieces) - .4mm Nozzle .12mm Layer Height or smaller, recommend 25% Space infill density for Screw Strength, Require Tree Supports 15 Angle, and Outer Brim - Filament 3.3m 9.8g, 1hr:23min
NOTE: The STL Models may display some artifacts from revision builds, but will not appear in Print
RECOMMEND: Allow pieces to cool to room temperature on printers Heatbed before removing to avoid warping
A .2mm Space Clearance Allowance / Tolerance was used for the .4mm Nozzle Print
Compartment Sizes:
1 – 22.50mm Width x 26.50mm Length x 9.30mm Depth
2 – 18.50mm Width x 34mm Length x 13.50mm Depth
3 – 33mm Width x 48mm Length x 5.70mm Depth
STLs (Usage and Completion Time based in Bambu A1 mini)
PuzzleBox_1.stl (2 pieces) - .4mm Nozzle .20mm Layer Height or smaller, Require Tree Supports for Screw Holes, overhang and side rails 20 Angle - Filament 15m 44g, 1:37min
PuzzleBox_2.stl (2 pieces) - .4mm Nozzle .20mm Layer Height or smaller, No Supports - Filament 12m 37g, 1hr:6min
PuzzleBox_3.stl (13 pieces) - .4mm Nozzle .12mm Layer Height or smaller, No Supports - Filament 5.5m 16.5g, 1hr:44min
PuzzleBox_4.stl (11 pieces) - .4mm Nozzle .12mm Layer Height or smaller, recommend 25% Space infill density for Screw Strength, Require Tree Supports 15 Angle, and Outer Brim - Filament 3.3m 9.8g, 1hr:23min
| Date published | 03/04/2024 |
| Tempo per farlo | 300 - 330 Minuti |
| Quantità di filamento | 110 grams |
| Dimensioni | 120mm x 60mm |
| Tecnologia | FDM |