Tool Shed with Slide in Walls
$8.00 Tool Shed with Slide in Walls
Published 2021-05-07T08:18:02+00:00
Now includes Weapon and General Storage expansion walls 5/4/2022
This small building is a tool shed with slide in walls, it has 11 variations plus two blanks. It is intended as a print mash up with an FDM body and resin door and walls. No reason not to resin print it all if you have 3 inch resin plate. Chitubox files included for slide-in walls and hide door
Walls will print in flat position as FDM or upright as resin. Main think to notice is supports right at wall edge to prevent
warging on resin printer. If you print flat on FDM use .1mm height, I might consider to turn on very light auto supports based on what you see.
3 or 4 will print fine without but there is a couple that benifit from a little extra fill. You will not be able to clean out
the supports but you will not really see them either. Use 7% auto support if you FDM Print the Hide Door
Date published | 07/05/2021 |
Price | $8.00 |
Supporto Gratuito | YES |