TRX4 and TRX6 Battery and Electronics tray + mounts (for 4320 DC expedition Cab + 4320 Single Cab (324mm))
TRX4 and TRX6 Battery and Electronics tray + mounts (for 4320 DC expedition Cab + 4320 Single Cab (324mm))
3D
Published 2023-04-27T09:21:06+00:00
*Update:
Battery and electronics tray is now included for use with this specific body and chassis combination. (TRX4 + 4320 Single Cab + 4320 DC Expedition Cab)
As the original inner fenders will need to be removed, this battery and electronics tray will allow you to mount the original receiver box onto it. As well as having enough space to mount an ESC with strong double sided tape.
The battery compartment allows for most large 3s LiPo packs, with maximum dimensions being 145x49x50mm. It also comes with slots to fit battery straps through.
In order to use the battery and electronics tray, please use the updated version of the front mounts.
Instructions to assemble to battery tray along with hardware list is included.
The Crawler 4320 DC Expedition Cab + 4320 Single Cab is a very popular combo on the TRX4 chassis, and because of that we've now designed mounts for this specific combo!
They can be found here and here
Please note that this will only work for the 324mm wheelbase version of the TRX4.
TRX4 with 313mm wheelbase will not work, you will need to convert to a 324mm wheelbase. You'll need 4 longer rear links (TRA8245) and most probably a longer female half shaft driveshaft.
Please note that all inner fenders and floorings will need to be removed in order to use this body combination.
Also be sure to source the following hardware:
- 3mm drill bit x1
- M3*8mm Button Head x2
- M3*15mm Button Head x26
- M3*20mm Button Head x2
- M3*15mm Countersink x2
-M3*20mm Countersink x10
- M3 Serrated Flanged Nuts x6
Instructions are included
| Date published | 27/04/2023 |