babyboyo1's Print of Modular Town District - Tabletop Terrain - 28 MM
127
views
1 comments
Loading comments... 
Community Print 3D Print of Modular Town District - Tabletop Terrain - 28 MM
Published 2023-11-30T04:10:30+00:00
0
1
Printed on: AnkerMake M5
Material: PLA
Description
As I have finished a first print of the "modular-town-district-house-5" STL file I have discovered that these houses are actually a little too small. I have 28 mm figures that don't fit through doorways nor on the small terrace of the houses.
I will say that these houses are fantastic in their appearance. Just note that you may want to increase the size of the house by 10 to 15% in your slicer.
I did have an issue on the first print when it came to printing the roof of the house. The printer suddenly stopped printing filament and started printing about 20 mm away from the roof on the Y axis. It was really odd because everything was printing fine, but suddenly it stopped. I immediately started printing the next house without making any changes and it is printing just fine as we speak. I will update this post once I decide if I am going to reprint the entire roof or just that part that's missing and super glue it together. That's a lot of PLA to just throw away. lol. Other than that these houses are fantastic thus far.