LiB's Print of Trombone Mouthpiece 26.26 mm or 1.034 in, throat 21/64
Community Print 3D Print of Trombone Mouthpiece 26.26 mm or 1.034 in, throat 21/64
Published 2019-02-12T18:05:35+00:00
1
0
Printed on: DIY/Homemade
Material: PLA
Description
enlarge ok
Some of the thickness is too thin(please see pics uploaded), If FDM,it is good that bigger than the conventional nozzle diameter 0.4mm。Usually the suggestion is bigger than 0.8mm。
Some parts are not connected and will scatter