Hexengarde - Late Pledge
Created by tiredworldstudio
Welcome to the Pledge Manager for Hexengarde, a range of 3D-printable gimdark urban fantasy scenery for tabletop gaming by Tired World Studio. Here you may late pledge for the HEXENGARD Kickstarter campaign. https://www.kickstarter.com/projects/tiredworldstudio/hexengarde
Hexengarde - Late Pledge
Created by tiredworldstudio- Pledges (3)
- Add-ons (0)
Pledges
87 backers
USD 55.00
11 Turpentine Alley
11 Turpentine Alley is a neglected dwelling, within which the city's poor and lower classes typically reside.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Street Goods
Street Goods includes a series of scatter pieces to bring some life to your table or give your models something to hide behind when the crossbow bolts start flying!
Includes:
- 2x Sacks
- 3x Barrels
- 2x Crates
- 1x Large Crate
- 1x Strong Box
- 1x Bale
- Parts pre-supported for resin printing
- Barrels with flat bottoms for FDM printing
- Test printed on an Elegoo Saturn
© 2023 Tired World Studio
Philosopher's Stone Tokens
Philosopher's Stone Tokens give your games an attractive looking McGuffin to fight over. These also come pre-supported for resin printing, and look wonderful printed in clear resin or filament.
- Comes pre-supported for Resin printing
- Prints in FDM without supports
- Test printed on a Prusa i3 mk3 at 0.1mm layer height with 10% infill and an Elegoo Saturn.
© 2023 Tired World Studio
13 Ember Lane
13 Ember Lane is an archetypal townhouse that many working-class citizens or merchants might have held deed. It has a modest footprint and is non descript enough that multiple prints of this kit wouldn't look out of place scattered about your table.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Market Stalls
It's market day in Hexengarde, time to haggle for some fresh fish, carrots or potions!
Market Stalls includes 4 different market stalls, a bench, a box, box tray and 6 different inserts to fill your boxes with.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
Wooden Fences & Hasty Barricades
A series of hastily constructed barricades and wooden fence sections to clog up your cobbled streets and give your models some much needed cover. This kit contains:
- 3x Hasty Barricades
- 6x 3in Wooden Fence Sections
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
City Foundations
The City Foundations kit is a modular system of risers, retaining walls, toppers, footbridges and stairs allowing you to build squares and terraces for those multi-level setups.
Using the openLOCK system of slots and clips, your risers are endlessly configurable so you never need play the same layout twice.
Riser pieces connect together using openLOCK clips. Retaining Walls also contain openLOCK slots, and will clip to the risers using openLOCK clips.
Comes with the following modular pieces:
- 1x 4 way 6inx6in Riser
- 5x 6in x 6in Toppers
- 1x Damaged Footbrigde
- 1x In-tact Footbridge
- 2x 6in Retaining Walls
- 1x 3in Retaining Wall
- 1x 6in stairs
- 1x Inner Corner Retaining Wall
- 1x Outter Corner Retaining Wall
The four way riser is 152.4mm x 152.4 (6in x 6in) and 65mm tall.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Street Props
The Street Props kit give you some detailed scatter pieces to bring your streets to life.
Includes:
- Noticeboard
- Street Sign
- Unlit Bazier
- Lit Brazier
- Stocks
- Handcart
- Sewer Grate
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Wrought Iron Walls
Wrought Iron Walls are modular walls that connect together using openLOCK clips. This kit includes:
- 3in Wall
- 4in Wall
- 5in Wall
- 2x Ruined Walls
- 1x I Column
- 1x Corner Column
- 1x End Column
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
51 Sourwood Mews
51 Sourwood Mews is an older structure that has been retrofitted into a wonky merchant house.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Scatter Ruins
This kit contains a number of various useful ruined pieces for you to scatter about the table and fill gaps in you layout.
Includes:
- 3x Double Story Ruins
- 5x Single Story Ruined Corners
- 4x Ruined Wall Pieces
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
New Rose Tavern
Every fantasy city table needs at least one watering hole, Hexengarde range has you covered with the addition of The New Rose Tavern!
The New Rose Tavern is another monster of a kit, with balconies, rooftops, stairscases and tunnels across multiple floors, this kit is excellent for gameplay!
- This model has a detailed interior and removable roof for access.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
Coach
Navigate the cobbled streets of Hexengarde in style and comfort (while keeping a keen eye out for bandits of course!) in this luxury coach! This is a large coach that comes complete with a detailed interior able to accomidate a figure on a 25mm base (as long as the pose isn't too dynamic!)
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.01mm layer height with 10% infill and an Elegoo Saturn.
© 2024 Tired World Studio
Detail Pack
This kit consists of a series of small detail pieces to affix to your exisiting printed or scratch built structures. Signs and Lanterns slot onto a small wall bracket so you can remove them for storage purposes.
Contains:
- 6x Signs
- Lantern
- 4x Canldes
- Wagon Wheel
- Rope
- 3x Posters
- 3x Wax Seals
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.05mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Fountain
The fountain is a great centrepiece kit to break up large open areas of your table and add a nice water feature to your crumbling city to brighten up the place!
Includes a statue of "The Baron", who is 28mm scaled and can be used as a regular miniature if you wish!
The fountain and statue come in both ruined and intact versions, so you can suit the mood of your table.
Includes options to build the column as just a statue rather than a fountain. The fountain and column base are also able to be used standalone without the elaborate raised base.
"The Baron" statue sculpted by the talented Bill Thornhill of Lost Heresy Miniatures.
The main fountain pieces are designed with FDM printing in mind and print without supports.
The statue is designed with resin printing in mind and comes pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Watch Station
Dotted throughout the districts of Hexengarde, The Town Watch use these looming towers to survail the streets below, as a barracks and to hold suspects awaiting trial (or simply sleeping off big night!)
This is a huge kit, and will dominate your tabletop as an impressive centrepiece.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Von Ulfmann Manor
Von Ulfmann Manor is a huge kit with distinctive details. The odd roofline, ramshackle tunnel and twisted iron railings add a ton of character. Its bigger footprint, multiple access points and walkways make this piece excellent for skirmish gameplay.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Bell Tower
Ding dong! Chiming of the hour or a frantic signal of impending doom, the bells ring out across the rain slicked streets of Hexengarde!
The Bell Tower is a massive model, and will tower over your battlefield. The perfect perch to pick off your opponents with a well placed crossbow bolt!
This kit is ideal for gameplay, with interior and exterior staircases and balconies snaking its way up the massive height of the tower.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
19 Latchkey Row
This is a free sample from the HEXENGARDE kickstarter campgin from Tired World Studio, running now:
https://www.kickstarter.com/projects/tiredworldstudio/hexengarde/
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
7 Ravenhill Lower
7 Ravenhill Lower is a large struture which includes two shopfronts connected by a covered arch. This kit is ideal for gameplay, as the walkway and outer stairs create many interesting fire lanes and access points.
- Designed with FDM printing in mind, prints without supports.
- This model has a detailed interior and removable roof for access.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
City Foundations Expansion
PLEASE NOTE: The City Foundations Kit is required to make full use of this exapansion!
The City Foundations Expansion kit adds more options to the modular system of risers, retaining walls, toppers, footbridges and stairs of the City Foundations Kit.
The Exapansion kit includes parts for angled and rounded corners with multiple topper options, a ruined foundation piece, booster rings to allow you to stack risers for mutli-level setups and more retaining wall options.
Using the openLOCK system of slots and clips, your risers are endlessly configurable so you never need play the same layout twice.
Riser pieces connect together using openLOCK clips. Retaining Walls also contain openLOCK slots, and will clip to the risers using openLOCK clips.
Comes with the following modular pieces:
1x Angled Corner Riser
1x Round Corner Riser
3x Angled Corner Toppers
3x Round Corner Toppers
1x Ruined Foundation
3x 6in Retaining Walls
1x 3in Stragith Stairs
1x 6in Straight Stairs
1x Stone Ramp
1x Booster Ring
1x Corner Booster
The corner risers are 152.4mm x 152.4 (6in x 6in) and 65mm tall.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Ramshackle Walkways and Ladders
The Ramshackle Walkways kit includes cobbled together wooden walkways, in two different lengths and two different widths, Ladders and a Scaffolding piece, allowing you to extend your runs of gangplanks above your board surface and connect ruined buildings and city foundations in snaking runs for those cinematic diving charges!
Contains:
- 1x Scaffold
- 1x Ladder
- 1x Long Narrow Walkway
- 1x Short Narrow Walkway
- 1x Long Wide Walkway
- 1x Short Wide Walkway
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
You get all 5 core Hexengarde Intact buildings plus the City Foundations, Wrought Iron Walls, Ramshackle Walkways, Street Goods and Philosopher's Stone Tokens to download right away. Also includes all 11 unlocked stretch goals (to be released over the coming months)! Printing for personal use only.
166 backers
USD 55.00
Philosopher's Stone Tokens
Philosopher's Stone Tokens give your games an attractive looking McGuffin to fight over. These also come pre-supported for resin printing, and look wonderful printed in clear resin or filament.
- Comes pre-supported for Resin printing
- Prints in FDM without supports
- Test printed on a Prusa i3 mk3 at 0.1mm layer height with 10% infill and an Elegoo Saturn.
© 2023 Tired World Studio
Street Goods
Street Goods includes a series of scatter pieces to bring some life to your table or give your models something to hide behind when the crossbow bolts start flying!
Includes:
- 2x Sacks
- 3x Barrels
- 2x Crates
- 1x Large Crate
- 1x Strong Box
- 1x Bale
- Parts pre-supported for resin printing
- Barrels with flat bottoms for FDM printing
- Test printed on an Elegoo Saturn
© 2023 Tired World Studio
51 Sourwood Mews Ruin
51 Sourwood Mews Ruin is an older structure that has been retrofitted into a wonky merchant house.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Market Stalls
It's market day in Hexengarde, time to haggle for some fresh fish, carrots or potions!
Market Stalls includes 4 different market stalls, a bench, a box, box tray and 6 different inserts to fill your boxes with.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
New Rose Tavern Ruin
Every fantasy city table needs at least one watering hole, evebn one smashed to bits, the Hexengarde range has you covered with the addition of The New Rose Tavern Ruin!
The New Rose Tavern is another monster of a kit, with balconies, rooftops, stairscases and tunnels across multiple floors, this kit is excellent for gameplay!
This model has a detailed interior and removable floors for interior access.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
Wooden Fences & Hasty Barricades
A series of hastily constructed barricades and wooden fence sections to clog up your cobbled streets and give your models some much needed cover. This kit contains:
- 3x Hasty Barricades
- 6x 3in Wooden Fence Sections
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Von Ulfmann Manor Ruin
Von Ulfmann Manor Ruin is a huge kit with distinctive details. The odd roofline, ramshackle tunnel and twisted iron railings add a ton of character. Its bigger footprint, multiple access points and walkways make this piece excellent for skirmish gameplay.
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
City Foundations
The City Foundations kit is a modular system of risers, retaining walls, toppers, footbridges and stairs allowing you to build squares and terraces for those multi-level setups.
Using the openLOCK system of slots and clips, your risers are endlessly configurable so you never need play the same layout twice.
Riser pieces connect together using openLOCK clips. Retaining Walls also contain openLOCK slots, and will clip to the risers using openLOCK clips.
Comes with the following modular pieces:
- 1x 4 way 6inx6in Riser
- 5x 6in x 6in Toppers
- 1x Damaged Footbrigde
- 1x In-tact Footbridge
- 2x 6in Retaining Walls
- 1x 3in Retaining Wall
- 1x 6in stairs
- 1x Inner Corner Retaining Wall
- 1x Outter Corner Retaining Wall
The four way riser is 152.4mm x 152.4 (6in x 6in) and 65mm tall.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Street Props
The Street Props kit give you some detailed scatter pieces to bring your streets to life.
Includes:
- Noticeboard
- Street Sign
- Unlit Bazier
- Lit Brazier
- Stocks
- Handcart
- Sewer Grate
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Wrought Iron Walls
Wrought Iron Walls are modular walls that connect together using openLOCK clips. This kit includes:
- 3in Wall
- 4in Wall
- 5in Wall
- 2x Ruined Walls
- 1x I Column
- 1x Corner Column
- 1x End Column
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Scatter Ruins
This kit contains a number of various useful ruined pieces for you to scatter about the table and fill gaps in you layout.
Includes:
- 3x Double Story Ruins
- 5x Single Story Ruined Corners
- 4x Ruined Wall Pieces
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Coach
Navigate the cobbled streets of Hexengarde in style and comfort (while keeping a keen eye out for bandits of course!) in this luxury coach! This is a large coach that comes complete with a detailed interior able to accomidate a figure on a 25mm base (as long as the pose isn't too dynamic!)
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.01mm layer height with 10% infill and an Elegoo Saturn.
© 2024 Tired World Studio
Detail Pack
This kit consists of a series of small detail pieces to affix to your exisiting printed or scratch built structures. Signs and Lanterns slot onto a small wall bracket so you can remove them for storage purposes.
Contains:
- 6x Signs
- Lantern
- 4x Canldes
- Wagon Wheel
- Rope
- 3x Posters
- 3x Wax Seals
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.05mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Fountain
The fountain is a great centrepiece kit to break up large open areas of your table and add a nice water feature to your crumbling city to brighten up the place!
Includes a statue of "The Baron", who is 28mm scaled and can be used as a regular miniature if you wish!
The fountain and statue come in both ruined and intact versions, so you can suit the mood of your table.
Includes options to build the column as just a statue rather than a fountain. The fountain and column base are also able to be used standalone without the elaborate raised base.
"The Baron" statue sculpted by the talented Bill Thornhill of Lost Heresy Miniatures.
The main fountain pieces are designed with FDM printing in mind and print without supports.
The statue is designed with resin printing in mind and comes pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Watch Station Ruin
medieval street tower warhammer shop town D&D watchtower Frostgrave Mordheim dwelling townwatch townhouse tiredworldstudio hexengarde
Dotted throughout the districts of Hexengarde, The Town Watch used these looming towers to survail the streets below, as a barracks and to hold suspects awaiting trial (or simply sleeping off big night!)
This is a huge kit, and will dominate your tabletop as an impressive centrepiece.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
Bell Tower Ruin
Ding dong! Chiming of the hour or a frantic signal of impending doom, the bells ring out across the rain slicked streets of Hexengarde!
The Bell Tower is a massive model, and will tower over your battlefield. The perfect perch to pick off your opponents with a well placed crossbow bolt!
This kit is ideal for gameplay, with interior and exterior staircases and balconies snaking its way up the massive height of the tower.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
13 Ember Lane Ruin
13 Ember Lane Ruin is an archetypal townhouse that many working-class citizens or merchants might have held deed. It has a modest footprint and is non descript enough that multiple prints of this kit wouldn't look out of place scattered about your table.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
11 Turpentine Alley Ruin
11 Turpentine Alley Ruin is a neglected dwelling, within which the city's poor and lower classes typically reside.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
City Foundations Expansion
PLEASE NOTE: The City Foundations Kit is required to make full use of this exapansion!
The City Foundations Expansion kit adds more options to the modular system of risers, retaining walls, toppers, footbridges and stairs of the City Foundations Kit.
The Exapansion kit includes parts for angled and rounded corners with multiple topper options, a ruined foundation piece, booster rings to allow you to stack risers for mutli-level setups and more retaining wall options.
Using the openLOCK system of slots and clips, your risers are endlessly configurable so you never need play the same layout twice.
Riser pieces connect together using openLOCK clips. Retaining Walls also contain openLOCK slots, and will clip to the risers using openLOCK clips.
Comes with the following modular pieces:
1x Angled Corner Riser
1x Round Corner Riser
3x Angled Corner Toppers
3x Round Corner Toppers
1x Ruined Foundation
3x 6in Retaining Walls
1x 3in Stragith Stairs
1x 6in Straight Stairs
1x Stone Ramp
1x Booster Ring
1x Corner Booster
The corner risers are 152.4mm x 152.4 (6in x 6in) and 65mm tall.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
19 Latchkey Row Ruin
This is a free sample from the HEXENGARDE kickstarter campgin from Tired World Studio, running now:
https://www.kickstarter.com/projects/tiredworldstudio/hexengarde/
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Ramshackle Walkways and Ladders
The Ramshackle Walkways kit includes cobbled together wooden walkways, in two different lengths and two different widths, Ladders and a Scaffolding piece, allowing you to extend your runs of gangplanks above your board surface and connect ruined buildings and city foundations in snaking runs for those cinematic diving charges!
Contains:
- 1x Scaffold
- 1x Ladder
- 1x Long Narrow Walkway
- 1x Short Narrow Walkway
- 1x Long Wide Walkway
- 1x Short Wide Walkway
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
7 Ravenhill Lower Ruin
7 Ravenhill Lower Ruin is a large struture which includes two shopfronts connected by a covered arch. This kit is ideal for gameplay, as the walkway and outer stairs create many interesting fire lanes and access points.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
You get all 5 core Hexengarde Ruined buildings plus the City Foundations, Wrought Iron Walls, Ramshackle Walkways, Street Goods and Philosopher's Stone Tokens to download right away. Also includes all 11 unlocked stretch goals (to be released over the coming months)! Printing for personal use only.
982 backers
USD 85.00
11 Turpentine Alley
11 Turpentine Alley is a neglected dwelling, within which the city's poor and lower classes typically reside.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
13 Ember Lane Ruin
13 Ember Lane Ruin is an archetypal townhouse that many working-class citizens or merchants might have held deed. It has a modest footprint and is non descript enough that multiple prints of this kit wouldn't look out of place scattered about your table.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Philosopher's Stone Tokens
Philosopher's Stone Tokens give your games an attractive looking McGuffin to fight over. These also come pre-supported for resin printing, and look wonderful printed in clear resin or filament.
- Comes pre-supported for Resin printing
- Prints in FDM without supports
- Test printed on a Prusa i3 mk3 at 0.1mm layer height with 10% infill and an Elegoo Saturn.
© 2023 Tired World Studio
Street Goods
Street Goods includes a series of scatter pieces to bring some life to your table or give your models something to hide behind when the crossbow bolts start flying!
Includes:
- 2x Sacks
- 3x Barrels
- 2x Crates
- 1x Large Crate
- 1x Strong Box
- 1x Bale
- Parts pre-supported for resin printing
- Barrels with flat bottoms for FDM printing
- Test printed on an Elegoo Saturn
© 2023 Tired World Studio
19 Latchkey Row
This is a free sample from the HEXENGARDE kickstarter campgin from Tired World Studio, running now:
https://www.kickstarter.com/projects/tiredworldstudio/hexengarde/
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
19 Latchkey Row Ruin
This is a free sample from the HEXENGARDE kickstarter campgin from Tired World Studio, running now:
https://www.kickstarter.com/projects/tiredworldstudio/hexengarde/
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
51 Sourwood Mews Ruin
51 Sourwood Mews Ruin is an older structure that has been retrofitted into a wonky merchant house.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Market Stalls
It's market day in Hexengarde, time to haggle for some fresh fish, carrots or potions!
Market Stalls includes 4 different market stalls, a bench, a box, box tray and 6 different inserts to fill your boxes with.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
New Rose Tavern Ruin
Every fantasy city table needs at least one watering hole, evebn one smashed to bits, the Hexengarde range has you covered with the addition of The New Rose Tavern Ruin!
The New Rose Tavern is another monster of a kit, with balconies, rooftops, stairscases and tunnels across multiple floors, this kit is excellent for gameplay!
This model has a detailed interior and removable floors for interior access.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
13 Ember Lane
13 Ember Lane is an archetypal townhouse that many working-class citizens or merchants might have held deed. It has a modest footprint and is non descript enough that multiple prints of this kit wouldn't look out of place scattered about your table.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Wooden Fences & Hasty Barricades
A series of hastily constructed barricades and wooden fence sections to clog up your cobbled streets and give your models some much needed cover. This kit contains:
- 3x Hasty Barricades
- 6x 3in Wooden Fence Sections
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Von Ulfmann Manor Ruin
Von Ulfmann Manor Ruin is a huge kit with distinctive details. The odd roofline, ramshackle tunnel and twisted iron railings add a ton of character. Its bigger footprint, multiple access points and walkways make this piece excellent for skirmish gameplay.
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
City Foundations
The City Foundations kit is a modular system of risers, retaining walls, toppers, footbridges and stairs allowing you to build squares and terraces for those multi-level setups.
Using the openLOCK system of slots and clips, your risers are endlessly configurable so you never need play the same layout twice.
Riser pieces connect together using openLOCK clips. Retaining Walls also contain openLOCK slots, and will clip to the risers using openLOCK clips.
Comes with the following modular pieces:
- 1x 4 way 6inx6in Riser
- 5x 6in x 6in Toppers
- 1x Damaged Footbrigde
- 1x In-tact Footbridge
- 2x 6in Retaining Walls
- 1x 3in Retaining Wall
- 1x 6in stairs
- 1x Inner Corner Retaining Wall
- 1x Outter Corner Retaining Wall
The four way riser is 152.4mm x 152.4 (6in x 6in) and 65mm tall.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Street Props
The Street Props kit give you some detailed scatter pieces to bring your streets to life.
Includes:
- Noticeboard
- Street Sign
- Unlit Bazier
- Lit Brazier
- Stocks
- Handcart
- Sewer Grate
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Wrought Iron Walls
Wrought Iron Walls are modular walls that connect together using openLOCK clips. This kit includes:
- 3in Wall
- 4in Wall
- 5in Wall
- 2x Ruined Walls
- 1x I Column
- 1x Corner Column
- 1x End Column
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
51 Sourwood Mews
51 Sourwood Mews is an older structure that has been retrofitted into a wonky merchant house.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Scatter Ruins
This kit contains a number of various useful ruined pieces for you to scatter about the table and fill gaps in you layout.
Includes:
- 3x Double Story Ruins
- 5x Single Story Ruined Corners
- 4x Ruined Wall Pieces
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
New Rose Tavern
Every fantasy city table needs at least one watering hole, Hexengarde range has you covered with the addition of The New Rose Tavern!
The New Rose Tavern is another monster of a kit, with balconies, rooftops, stairscases and tunnels across multiple floors, this kit is excellent for gameplay!
- This model has a detailed interior and removable roof for access.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
Coach
Navigate the cobbled streets of Hexengarde in style and comfort (while keeping a keen eye out for bandits of course!) in this luxury coach! This is a large coach that comes complete with a detailed interior able to accomidate a figure on a 25mm base (as long as the pose isn't too dynamic!)
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.01mm layer height with 10% infill and an Elegoo Saturn.
© 2024 Tired World Studio
Detail Pack
This kit consists of a series of small detail pieces to affix to your exisiting printed or scratch built structures. Signs and Lanterns slot onto a small wall bracket so you can remove them for storage purposes.
Contains:
- 6x Signs
- Lantern
- 4x Canldes
- Wagon Wheel
- Rope
- 3x Posters
- 3x Wax Seals
All pieces come both parted for FDM printing and pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.05mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Fountain
The fountain is a great centrepiece kit to break up large open areas of your table and add a nice water feature to your crumbling city to brighten up the place!
Includes a statue of "The Baron", who is 28mm scaled and can be used as a regular miniature if you wish!
The fountain and statue come in both ruined and intact versions, so you can suit the mood of your table.
Includes options to build the column as just a statue rather than a fountain. The fountain and column base are also able to be used standalone without the elaborate raised base.
"The Baron" statue sculpted by the talented Bill Thornhill of Lost Heresy Miniatures.
The main fountain pieces are designed with FDM printing in mind and print without supports.
The statue is designed with resin printing in mind and comes pre-supported for resin printing.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill and an Elegoo Saturn using Conjure Sculpt resin.
© 2023 Tired World Studio
Watch Station
Dotted throughout the districts of Hexengarde, The Town Watch use these looming towers to survail the streets below, as a barracks and to hold suspects awaiting trial (or simply sleeping off big night!)
This is a huge kit, and will dominate your tabletop as an impressive centrepiece.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Watch Station Ruin
medieval street tower warhammer shop town D&D watchtower Frostgrave Mordheim dwelling townwatch townhouse tiredworldstudio hexengarde
Dotted throughout the districts of Hexengarde, The Town Watch used these looming towers to survail the streets below, as a barracks and to hold suspects awaiting trial (or simply sleeping off big night!)
This is a huge kit, and will dominate your tabletop as an impressive centrepiece.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2024 Tired World Studio
Bell Tower Ruin
Ding dong! Chiming of the hour or a frantic signal of impending doom, the bells ring out across the rain slicked streets of Hexengarde!
The Bell Tower is a massive model, and will tower over your battlefield. The perfect perch to pick off your opponents with a well placed crossbow bolt!
This kit is ideal for gameplay, with interior and exterior staircases and balconies snaking its way up the massive height of the tower.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Von Ulfmann Manor
Von Ulfmann Manor is a huge kit with distinctive details. The odd roofline, ramshackle tunnel and twisted iron railings add a ton of character. Its bigger footprint, multiple access points and walkways make this piece excellent for skirmish gameplay.
- This model has a detailed interior and removable roof for access.
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Bell Tower
Ding dong! Chiming of the hour or a frantic signal of impending doom, the bells ring out across the rain slicked streets of Hexengarde!
The Bell Tower is a massive model, and will tower over your battlefield. The perfect perch to pick off your opponents with a well placed crossbow bolt!
This kit is ideal for gameplay, with interior and exterior staircases and balconies snaking its way up the massive height of the tower.
Designed with FDM printing in mind, prints without supports.
This model has a detailed interior and removable floors and roofs for access.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
11 Turpentine Alley Ruin
11 Turpentine Alley Ruin is a neglected dwelling, within which the city's poor and lower classes typically reside.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
7 Ravenhill Lower
7 Ravenhill Lower is a large struture which includes two shopfronts connected by a covered arch. This kit is ideal for gameplay, as the walkway and outer stairs create many interesting fire lanes and access points.
- Designed with FDM printing in mind, prints without supports.
- This model has a detailed interior and removable roof for access.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
City Foundations Expansion
PLEASE NOTE: The City Foundations Kit is required to make full use of this exapansion!
The City Foundations Expansion kit adds more options to the modular system of risers, retaining walls, toppers, footbridges and stairs of the City Foundations Kit.
The Exapansion kit includes parts for angled and rounded corners with multiple topper options, a ruined foundation piece, booster rings to allow you to stack risers for mutli-level setups and more retaining wall options.
Using the openLOCK system of slots and clips, your risers are endlessly configurable so you never need play the same layout twice.
Riser pieces connect together using openLOCK clips. Retaining Walls also contain openLOCK slots, and will clip to the risers using openLOCK clips.
Comes with the following modular pieces:
1x Angled Corner Riser
1x Round Corner Riser
3x Angled Corner Toppers
3x Round Corner Toppers
1x Ruined Foundation
3x 6in Retaining Walls
1x 3in Stragith Stairs
1x 6in Straight Stairs
1x Stone Ramp
1x Booster Ring
1x Corner Booster
The corner risers are 152.4mm x 152.4 (6in x 6in) and 65mm tall.
Designed with FDM printing in mind, prints without supports.
Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
Ramshackle Walkways and Ladders
The Ramshackle Walkways kit includes cobbled together wooden walkways, in two different lengths and two different widths, Ladders and a Scaffolding piece, allowing you to extend your runs of gangplanks above your board surface and connect ruined buildings and city foundations in snaking runs for those cinematic diving charges!
Contains:
- 1x Scaffold
- 1x Ladder
- 1x Long Narrow Walkway
- 1x Short Narrow Walkway
- 1x Long Wide Walkway
- 1x Short Wide Walkway
- Designed with FDM printing in mind, prints without supports or has pre-supported parts
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
7 Ravenhill Lower Ruin
7 Ravenhill Lower Ruin is a large struture which includes two shopfronts connected by a covered arch. This kit is ideal for gameplay, as the walkway and outer stairs create many interesting fire lanes and access points.
- Designed with FDM printing in mind, prints without supports.
- Tired World Studio's kits come with detailed parts lists and assembly instructions.
- Test printed on a Prusa i3 mk3 at 0.2mm layer height with 10% infill.
© 2023 Tired World Studio
You get all 5 core Hexengarde Ruined buildings, all 5 core Hexengarde Intact buildings, plus the City Foundations, Wrought Iron Walls, Ramshackle Walkways, Street Goods and Philosopher's Stone Tokens to download right away. Also includes all 11 unlocked stretch goals (to be released over the coming months)! Printing for personal use only.