THE HEIST
Created by 
AnvilDigitalForge
3d printable bank heist miniatures for tabletop gaming and RPGs - Fully modular & pre-supported STLs! This is the late pledge page for The Heist Kickstarter. Please see The Heist Kickstarter page for full details about what is included in the STL packs. Stretch goals unlocked on the Kickstarter will be included, extra funding from the pledge manager late pledges will not unlock any further Stretch Goals.
This campaign is finished
THE HEIST
Created by AnvilDigitalForge
- Pledges (2)
- Add-ons (0)
Pledges
299 backers
USD 18.50
The Heist - Core Pack
What's Included:
Our CORE offering for The Heist Kickstarter, which ran in October 2023.
Multi-Shell Options: A number of STLs are labelled with "(Multi Shell)" - these files can be imported into Blender (recommended), or Meshmixer, or various other programs and split into multiple different shells, giving you more modelling options! Anything marked with "(Multi Shell)" is even more customisable than just its basic STL would allow! Watch this video for a basic intro: https://www.youtube.com/watch?v=3hq6JWKJVJ0
SWAT Modular Infantry
- 5 x Pairs of Legs (male) in various poses, (Multi-Shell).
- 3 x Pairs of Arms (male) with UMP sub-machine guns in various poses, (Multi-Shell).
- 2 x Pairs of Arms (male) with Remington Shotguns in various poses, (Multi-Shell).
- 1 x Pair of Arms (male) wielding a pistol in two-handed grip, (Multi-Shell).
- 1 x Arm with a heavy ballistic shield, (Multi-Shell).
- 1 x Arm with an open wrist joint for melee, pistol, or hands holding accessories, (Multi-Shell).
- 4 x Bulletproof vest torsos with various pouches and accessories, (Multi-Shell).
- 10 x PASGT helmeted heads with various accessories including googles, NODs / NVGs, Gasmask, etc, (Multi-Shell).
Criminal Modular Infantry
- 24 x Criminal Masks including Creepy Smiles, Clowns, Animals, Movie Monsters, Pop-Culture references, and Politicians, (Multi-Shell).
- 8 x Unique Criminal Heads, 4 male, 4 female, (Multi-Shell).
- 6 x Torsos (male) in civilian clothes, (Multi-Shell).
- 3 x Torsos (female) in civilian clothes, (Multi-Shell).
- 4 x Torsos and Legs (male) with civilian clothes in various poses, (Multi-Shell).
- 2 x Torsos and Legs (female) with civilian clothes in various poses, (Multi-Shell).
- 5 x Pairs of Legs (male) with civilian clothes in various poses, (Multi-Shell).
- 2 x Pairs of legs (female) with civilian clothes in various poses, (Multi-Shell).
- 3 x Pairs of arms (male) wielding Uzi's, (Multi-Shell).
- 2 x Pairs of arms (female) wielding Uzi's, (Multi-Shell).
- 2 x Pairs of arms wielding Tommy guns, 1 male, 1 female, (Multi-Shell).
- 3 x Pairs of Melee / Pistol arms (male) with open wrist joints, (Multi-Shell).
- 2 x Pairs of Melee / Pistol arms (female) with open wrist joints, (Multi-Shell).
Weapons & Accessories
- 1 x UMP sub-machine gun with Pistol-Grip joint and foregrip, (Multi-Shell).
- 1 x Remington Shotgun.
- 1 x Pistol with hand, (Multi-Shell).
- 1 x Riot Shield, (Multi-Shell).
- 1 x Smoke Grenade in hand, (Multi-Shell).
- 3 x Active Smoke grenades, (Multi-Shell).
- 2 x Inactive Smoke Grenades, (Multi-Shell).
- 2 x Hand Gestures.
- 1 x Thompson Machine Gun with drum magazine, (Multi-Shell).
- 1 x Uzi with hand (Multi-Shell).
- 1 x Uzi with pistol-grip joint.
- 1 x Sawn-Off Shotgun with hand, (Multi-Shell).
- 1 x Duffle Bag with hand, (Multi-Shell).
- 1 x Wad of bills, (Multi-Shell).
- 1 x Detonator in hand, (Multi-Shell).
- 1 x Mobile Phone in hand, (Multi-Shell).
Hostages, Scenery & Terrain
- 1 x Bank Manager Hostage, (Multi-Shell).
- 1 x Security Guard Hostage tied to an office chair, (Multi-Shell).
- 1 x Vault Door and Frame.
- 2 x Vault Walls with Safe Deposit Boxes.
- 1 x Security Camera and Wall Mount.
- 1 x Freestanding Safe Deposit Box array.
- 1 x Safe (closed)
- 1 x Safe and door (open) with cash and gold bullion inside, (Multi-Shell).
- 1 x Pile of Cash.
- 1 x Wad of Cash.
- 1 x Pile of Gold Bullion.
- 1 x Gold Bar.
- 1 x Duffle bag (open) filled with cash.
- 1 x C4 Explosive.
- 1 x Large Powered Drill and mounting scaffold, (Multi-Shell)
Are the Parts Presupported?
Figures and Infantry Parts
Yes. Our figure STL files come with a pre-made support structure, included as a separate shell where appropriate.
Digital Kitbash
These files are intentionally left unsupported. They are not designed to be printed separately.
Scenery or Bases
Scenery objects or bases are often designed to be printed directly on the build platform, and in this case, are not supplied supports.
Back our Patreon!
Each month we release a new set of digital files on Patreon - You can get these if you back us for $10 a month, making a huge saving on buying them separately!
Sign up now so that you don’t miss out:
The Heist - Stretch Goals
Description Work in Progress
Note: This is a late pledge for The Heist Kickstarter. Please check the Kickstarter page for full details of what is included. You will get the following STLs Modern Police SWAT Team - Modular, Criminal Gang - Modular, Civilian Hostages and Bank Vault Scatter Terrain and ALL stretch goals unlocked! - - - - - - - -
76 backers
USD 67.50
The Heist - Core Pack
What's Included:
Our CORE offering for The Heist Kickstarter, which ran in October 2023.
Multi-Shell Options: A number of STLs are labelled with "(Multi Shell)" - these files can be imported into Blender (recommended), or Meshmixer, or various other programs and split into multiple different shells, giving you more modelling options! Anything marked with "(Multi Shell)" is even more customisable than just its basic STL would allow! Watch this video for a basic intro: https://www.youtube.com/watch?v=3hq6JWKJVJ0
SWAT Modular Infantry
- 5 x Pairs of Legs (male) in various poses, (Multi-Shell).
- 3 x Pairs of Arms (male) with UMP sub-machine guns in various poses, (Multi-Shell).
- 2 x Pairs of Arms (male) with Remington Shotguns in various poses, (Multi-Shell).
- 1 x Pair of Arms (male) wielding a pistol in two-handed grip, (Multi-Shell).
- 1 x Arm with a heavy ballistic shield, (Multi-Shell).
- 1 x Arm with an open wrist joint for melee, pistol, or hands holding accessories, (Multi-Shell).
- 4 x Bulletproof vest torsos with various pouches and accessories, (Multi-Shell).
- 10 x PASGT helmeted heads with various accessories including googles, NODs / NVGs, Gasmask, etc, (Multi-Shell).
Criminal Modular Infantry
- 24 x Criminal Masks including Creepy Smiles, Clowns, Animals, Movie Monsters, Pop-Culture references, and Politicians, (Multi-Shell).
- 8 x Unique Criminal Heads, 4 male, 4 female, (Multi-Shell).
- 6 x Torsos (male) in civilian clothes, (Multi-Shell).
- 3 x Torsos (female) in civilian clothes, (Multi-Shell).
- 4 x Torsos and Legs (male) with civilian clothes in various poses, (Multi-Shell).
- 2 x Torsos and Legs (female) with civilian clothes in various poses, (Multi-Shell).
- 5 x Pairs of Legs (male) with civilian clothes in various poses, (Multi-Shell).
- 2 x Pairs of legs (female) with civilian clothes in various poses, (Multi-Shell).
- 3 x Pairs of arms (male) wielding Uzi's, (Multi-Shell).
- 2 x Pairs of arms (female) wielding Uzi's, (Multi-Shell).
- 2 x Pairs of arms wielding Tommy guns, 1 male, 1 female, (Multi-Shell).
- 3 x Pairs of Melee / Pistol arms (male) with open wrist joints, (Multi-Shell).
- 2 x Pairs of Melee / Pistol arms (female) with open wrist joints, (Multi-Shell).
Weapons & Accessories
- 1 x UMP sub-machine gun with Pistol-Grip joint and foregrip, (Multi-Shell).
- 1 x Remington Shotgun.
- 1 x Pistol with hand, (Multi-Shell).
- 1 x Riot Shield, (Multi-Shell).
- 1 x Smoke Grenade in hand, (Multi-Shell).
- 3 x Active Smoke grenades, (Multi-Shell).
- 2 x Inactive Smoke Grenades, (Multi-Shell).
- 2 x Hand Gestures.
- 1 x Thompson Machine Gun with drum magazine, (Multi-Shell).
- 1 x Uzi with hand (Multi-Shell).
- 1 x Uzi with pistol-grip joint.
- 1 x Sawn-Off Shotgun with hand, (Multi-Shell).
- 1 x Duffle Bag with hand, (Multi-Shell).
- 1 x Wad of bills, (Multi-Shell).
- 1 x Detonator in hand, (Multi-Shell).
- 1 x Mobile Phone in hand, (Multi-Shell).
Hostages, Scenery & Terrain
- 1 x Bank Manager Hostage, (Multi-Shell).
- 1 x Security Guard Hostage tied to an office chair, (Multi-Shell).
- 1 x Vault Door and Frame.
- 2 x Vault Walls with Safe Deposit Boxes.
- 1 x Security Camera and Wall Mount.
- 1 x Freestanding Safe Deposit Box array.
- 1 x Safe (closed)
- 1 x Safe and door (open) with cash and gold bullion inside, (Multi-Shell).
- 1 x Pile of Cash.
- 1 x Wad of Cash.
- 1 x Pile of Gold Bullion.
- 1 x Gold Bar.
- 1 x Duffle bag (open) filled with cash.
- 1 x C4 Explosive.
- 1 x Large Powered Drill and mounting scaffold, (Multi-Shell)
Are the Parts Presupported?
Figures and Infantry Parts
Yes. Our figure STL files come with a pre-made support structure, included as a separate shell where appropriate.
Digital Kitbash
These files are intentionally left unsupported. They are not designed to be printed separately.
Scenery or Bases
Scenery objects or bases are often designed to be printed directly on the build platform, and in this case, are not supplied supports.
Back our Patreon!
Each month we release a new set of digital files on Patreon - You can get these if you back us for $10 a month, making a huge saving on buying them separately!
Sign up now so that you don’t miss out:
Undercover Operatives - Anvil Digital Forge March 2023
What's Included
The entire Anvil Digital Forge Patreon release for March 2023, including;
Multi-Shell Options:A number of STLs are labelled with "(Multi Shell)" - these files can be imported into Blender (recommended), or Meshmixer, or various other programs and split into multiple different shells, giving you more modelling options! Anything marked with "(Multi Shell)" is even more customisable than just its basic STL would allow! Watch this video for a basic intro: https://www.youtube.com/watch?v=3hq6JWKJVJ0
Character
- 1 x Female operative with cradled Remington ACR and arm lifted firing a flare gun. (Multi-Shell)
- 1 x Male body with combined legs/torso in a dynamic running pose. (Multi-Shell)
Heads
- 8 x Male heads with various face coverings, beards, gasmasks, and communications headsets. (Multi-Shell)
- 5 x Female heads with various face coverings, sunglasses, hoods, and communications headsets. (Multi-Shell)
- 1 x Unisex head with raised hood and full face gasmask. (Multi-Shell)
Upper Bodies
- 3 x Male upper bodies holding each weapon in dynamic poses. (Multi-Shell)
- 2 x Female upper bodies holding the ACR and MRAD in dynamic poses. (Multi-Shell)
Arms
- 3 x Pairs of male arms with Pistol-Grip rifle joints in various poses.
- 3 x Pairs of female arms with Pistol-Grip rifle joints in various poses.
- 2 x Pairs of male arms with Open Wrist joints for melee/pistol or accessory hands.
- 2 x Pairs of female arms, with Open Wrist joints for melee/pistol or accessory hands,
- 1 x Pair of female arms holding a pistol in a two-handed firing pose.
- 1 x Female arm posed looking at wristwatch. (Multi-Shell)
Torsos
- 5 x Male torsos in body armour and covered in tactical webbing/pouches. 3 have civilian backpacks and 1 has a long jacket. (Multi-Shell)
- 5 x Female torsos in body armour and covered in tactical webbing/pouches. 2 have civilian backpacks and 1 has a long jacket. (Multi-Shell)
Legs
- 5 x Pairs of male legs in various poses, in combat trousers with optional pockets and pouches. (Multi-Shell)
- 5 x Pairs of female legs in various poses, in combat trousers with optional pockets and pouches. (Multi-Shell)
- 2 x BONUS Pairs of legs in kneeling poses (1 male, 1 female) with optional pockets and pouches. (Multi-Shell)
Weapons & Accessories
- 1 x Remington ACR, with optional MagPul stock and T1 Red Dot sight. (Multi-Shell)
- 1 x BONUS Remington ACR, with optional MagPul stock, suppressor, and cloth wrap. (Multi-Shell)
- 1 x Maxim MDX 510, with optional MagPul stock and Specter scope. (Multi-Shell)
- 1 x Barrett MRAD, with optional MagPul stock and 12x sniper scope and Night Vision camera. (Multi-Shell)
- 1 x SIG P226, with optional suppressor and torch. (Multi-Shell)
- 1 x Detonator remote, held in hand. (Multi-Shell)
- 2 x Pipe Bombs, with burning fuses, held in hand. (Multi-Shell)
- 1 x M1 grenade, held in hand. (Multi-Shell)
- 1 x Lighter, held in hand. (Multi-Shell)
- 1 x Flare gun, held in hand. (Multi-Shell)
- 1 x Regiments Pistol Grip, held in hand.
Terrain
- 1 x Chain link fence, plain
- 1 x Chain link fence with gate. (Multi-Shell)
Are the Parts Presupported?
Figures and Infantry Parts
Yes. Our figure STL files come with a pre-made support structure, included as a separate shell where appropriate.
Digital Kitbash
These files are intentionally left unsupported. They are not designed to be printed separately.
Scenery or Bases
Scenery objects or bases are often designed to be printed directly on the build platform, and in this case, are not supplied supports.
Back our Patreon!
Each month we release a new set of digital files on Patreon - You can get these if you back us for $10 a month, making a huge saving on buying them separately!
Sign up now so that you don’t miss out:
Modern Civilians - Anvil Digital Forge February 2023
What's Included
The entire Anvil Digital Forge Patreon release for February 2023, including;
Multi-Shell Options:A number of STLs are labled with "(Multi Shell)" - these files can be imported into Blender (reccomended), or Meshmixer, or various other programs and split into multiple different shells, giving you more modeling options! Anything marked with "(Multi Shell)" is even more customisable than just its basic STL would allow! Watch this video for a basic intro: https://www.youtube.com/watch?v=3hq6JWKJVJ0
Civilians
Heads
- 12 x Male heads with various expressions and hair styles / hats. (Multi-Shell)
- 9 x Female heads with various facial expressions and hair styles / hats. (Multi-Shell)
- 2 x Female heads with long hair, designed exclusively for Digital Kitbashing
Arms
- 2 x Pairs of arms posed behind the head. 1 male, 1 female.
- 2 x Pairs of arms holding a tablet. 1 male, 1 female.
- 2 x Pairs of arms posed in a defensive posture. 1 male, 1 female. (Multi-Shell)
- 2 x Pairs of arms holding a baseball bat. 1 male, 1 female. (Multi-Shell)
- 2 x Civilian arms holding a Placard. 1 male, 1 female. (Multi-Shell)
- 2 x Civilian arms posed with clenched fists. 1 male, 1 female. (Multi-Shell)
- 20 x Civilian arms with open wrist joints, in various poses. 10 male, 10 female.
Torsos
- 7 x Male civilian torsos in various clothing styles, 2 with backpacks. (Multi-Shell)
- 6 x Female civilian torsos in various clothing styles, 2 with backpacks. (Multi-Shell)
Legs
- 5 x Male legs in various clothing styles.
- 6 x Female legs in various clothing styles.
Single-Piece Bodies
- 4 x Male bodies in various clothing styles. (Multi-Shell)
- 4 x Female bodies in various clothing styles. (Multi-Shell)
- 2 x Cowering bodies with 1 integrated arm. 1 male, 1 female.
Accessories
- 1 x Briefcase, held in hand. (Multi-Shell)
- 1 x Plastic shopping bag, held in hand. (Multi-Shell)
- 1 x Cordless drill, held in hand. (Multi-Shell)
- 1 x Claw hammer, held in hand. (Multi-Shell)
- 2 x Smart phones, held in hands.
- 1 x Tool chest, held in hand. (Multi-Shell)
- 1 x Burger, held in hand. (Multi-Shell)
- 1 x Reusable coffee cup, held in hand. (Multi-Shell)
- 1 x Megaphone, held in hand. (Multi-Shell)
- 1 x Adjustable wrench, held in hand. (Multi-Shell)
- 1 x Laptop. (Multi-Shell)
- 1 x Tablet.
- 1 x Pair of handcuffs, designed exclusively for Digital Kitbashing
- 1 x Smart phone, designed exclusively for Digital Kitbashing
Terrian
- 4 x Street barriers
Are the Parts Presupported?
Figures and Infantry Parts
Yes. Our figure STL files come with a pre-made support structure, included as a separate shell where appropriate.
Digital Kitbash
These files are intentionally left unsupported. They are not designed to be printed separately.
Scenery or Bases
Scenery objects or bases are often designed to be printed directly on the build platform, and in this case, are not supplied supports.
Back our Patreon!
Each month we release a new set of digital files on Patreon - You can get these if you back us for $10 a month, making a huge saving on buying them separately!
Sign up now so that you don’t miss out:
Modern Urban Road Scatter Terrain - Anvil Digital
What's Included
41 Pieces of Scenic Terrain! including;
- 1 x Traffic Light. (Multi-shell)
- 10 x Different street barrier types, including traffic cones, water-filled reflective barrels, water-filled Jersey barrier, diversion, reflective poles, and road closed. (Multi-shell)
- 3 x Damaged versions of the road closed barrier, traffic light, and traffic cone. (Multi-shell)
- 11 x American Street signs. (Multi-shell)
- 2 x Different types of newspaper dispensers.
- 1 x Fire hydrant.
- 1 x US Mail post box.
- 1 x Manhole cover
- 1 x Bench (Multi-shell)
- 4 x Trash bags
- 2 x Dumpsters, one single-piece, one with posable bin lids
- 2 x Street trash cans (Multi-shell)
- 2 x Crushed beverage containers, one coffee cup, one soda can
Are the Parts Presupported?
Yes! These files come with an optimised support structure where necessary. Some parts may lack a support structure, and if this is the case, they print flat on thei print-bed with no supports necessary. There are also unsupported versions in a separate folder.
Back our Patreon!
Each month we release a new set of digital files on Patreon - You can get these if you back us for $10 a month, making a huge saving on buying them separately!
Sign up now so that you don’t miss out:
Modern Road & Sidewalk Bases - Anvil Digital
What's Included
43 Round straight bevel edged Modern Road & Sidewalk Bases in a pleathora of sizes!
- 10 x 25mm
- 10 x 32mm
- 8 x 40mm
- 5 x 50mm
- 5 x 60mm
- 3 x 80mm
- 2 x 100mm
And 16 Oval straight bevel edged Bases;
- 5 x 35mm by 60mm
- 3 x 47mm by 75mm
- 3 x 52mm by 90mm
- 2 x 70mm by 105mm
- 2 x 90mm by 120mm
- 1 x 90mm by 170mm
And 20 "Super Hero Round" bases with stepped, straight-edge bases;
- 10 x 35mm Superhero Round
- 5 x 50mm Superhero Round
- 5 x 65mm Superhero Round
Additionally, we have supplied a .Blend file (which you can open using Blender, a fully functional free CAD program) containing the "Urban Base Plate" and all the cutters used to create this pack, which you can use Blender to boolean-cut any additional bases you wish!
Are the Parts Presupported? How do I print them?
No. These Files are NOT supplied with a Pre-Supported version, as we know people like to print bases in different ways and auto-supports are usually effective. You will need to orientate and support the model yourself in your chosen 3D software.
The Bases are pre hollowed to save resin and provide better grip. You need to support them off the build plate by a few mm - we have done successful test prints with the bases both horizontally and at an approx 45-degree angle.
DO NOT attempt to print these bases flat on the build plate, it is highly likely they will fail to print properly.
Back our Patreon!
Each month we release a new set of digital files on Patreon - You can get these if you back us for $10 a month, making a huge saving on buying them separately!
Sign up now so that you don’t miss out:
The Heist - Stretch Goals
Description Work in Progress
Note: This is a late pledge for The Heist Kickstarter. Please check the Kickstarter page for full details of what is included. You will get the following STLs: Modern Police SWAT Team - Modular Criminal Gang - Modular Civilian Hostages and Bank Vault Scatter Terrain ALL stretchgoals unlocked during the Kickstarter campaign! Modern Civilians - Complete Modular Collection Undercover Operatives - Complete Modular Collection Modern Urban Scatter Terrain - Complete Collection Modern Road and Sidewalk Bases - Complete Collection - - - - - - - - -