Uncharted Lands: Book & STL Collections
Created by TheLostAdventuresCo
A New Lost Adventures 5E Supplement & 8 New All-In-One STL Collections. Includes the Digital Uncharted Lands Book & the following STL collections: - Blasted Isle - Greensea Booster - Golden Plains - Greymill Sewers - Town of Greymill - Kobold Coalition - Moonlit Mountains - Sunken City
Uncharted Lands: Book & STL Collections
Created by TheLostAdventuresCo- Pledges (1)
- Add-ons (0)
Pledges
2223 backers
USD 80.00
Amberhusk Troll Hunters (Set of 3)
These hulking ladies are ready to crush some player skulls! Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Ronald Bondoc
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Amberhusk Troll Hunters (Set of 3) is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Ancient Black Dragon
This gargantuan dragon is one of the largest minis you will ever see soaring down to splash onto your table.
A massive creature split for printing on printers as small as the sonic mini!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ancient Black Dragon is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Ancient Remorhaz
A massive creature skitters along the snowy terrain, the spines on its back glowing with red hot heat, its an ancient remorhaz!... and it is hungry.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ancient Remorhaz is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Ancient Rubble (Set of 8)
Pile it on with these rubble piles!
This set is supportless and prints with no additional slicer supports. Some files are supported for printing in resin on printers as small as the Sonic Mini.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sunken City Core Bridges (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Ancient Temple Gates (set of 2)
These ancient gates serve as entry points to all-new adventures!
This set includes 2 ancient gates.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Przemysław Słowiński
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ancient Temple Gates (set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Arachmortus (2 Poses)
Arachmortus "The Flying Death", feared by all who venture into the dark spaces under the earth. This horrid creature is a lurking terror of the dark, sure to send shivers down your players' spines.
Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: José Luis Hernández
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Arachmortus (2 Poses) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Aranai Grief Paladins (Set of 2)
These creepy crawly paladins make a wonderful addition to any table, whether as a player character, NPC, or wall-crawling enemy.
2 aranai scaled for 25mm bases.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Aranai Grief Paladins (Set of 2) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Aranai Mourners (Set of 2)
These creepy crawly ladies make a wonderful addition to any table, whether as a player character, NPC, or wall-crawling enemy.
2 aranai scaled for 25mm bases.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Aranai Mourners (Set of 2) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Arctic Owlbears (Set of 3)
Chilling! These enemies are sure to freeze your players in their tracks.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Elisa Galindo
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Arctic Owlbears (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Artificer Tower
Mad scientists, powerful artificers, and perhaps the odd insane kobold might reside in this dilapidated tower. Artificer tower includes the following:
Artificer tower, consisting of 5 playable floors
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Artificer Tower is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Axebeaks (Set of 4)
Whether they are running wild or saddled for your players to ride, these axebeaks are ready to chop down enemies or fill outskirt settlements.
Each of the axebeaks is sized to fit on a 50mm base.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: James Dorrington
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Axebeaks (Set of 4) a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Barrel Tower
Trash kobolds need lookout points, and what better lookout than a tower made of rickety barrels? I am sure it's structurally sound...
This set includes 1 barrel tower split into two pieces.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Barrel Tower is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Basilisk
Crawling on a petrified adventurer this creature is ready to slither into your games and rock your player's socks off.... or turn them to stone.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Basilisk is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Battle Remains (Set of 4)
Litter your battlefields with the corpses of fallen foes!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Battle Remains (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Battle Remnants (Set of 9)
Litter your battlefields with the corpses of fallen foes!
This set is supportless and prints with no additional slicer supports. Supports have been included for printing of terrain pieces that fit on a sonic mini or smaller printer.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Battle Remnants (Set of 9) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Bhan'Tar (Set of 5)
5 Bhan'Tar to populate your Golden Plain's settlements, roam the open ranges or lay waste to anyone that decides to mess with them.
Each of the bhan'tar is sized to fit on a 50mm base.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Bhan'Tar is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Pit Fiend Executioner
You just opened up a huge can of "nope". When this huge-sized creature drops onto your table you are sure to hear gasps of horror and groans of "Oh no it's a TPK".
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Pit Fiend Executioner is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Bhan'Tar Elder Huts (Set of 2)
Amazing tents with interior playable spaces large enough for several minis to hang out :)
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Bhan'Tar Elder Huts (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Snow Traps
Trap your players in frozen traps, trust me, they will love it.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Snow Traps (Set of 2)is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Bhan'Tar Huts (Set of 3)
Amazing tents with interior playable spaces large enough for several minis to hang out :)
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Bhan'Tar Huts (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Magma Worm
The eye of Sauron is stuck on a flaming body made of magma, rock, and fire.... so probably someone in the party will want to keep it as a pet, especially because it is gargantuan.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Magma Worm is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Birch Trees (Set of 2)
Two beautiful birch trees to shade your miniatures
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Birch Trees (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Death Giant
This colossal giant is surrounded by the swirling souls of those it has slain. Don't worry though I am sure he makes excellent company at dinner parties. So long as you like said parties ending in screams of horrifying agony.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Dan - Liontower
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Death Giant is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Birdfolk (Cae'lan) Ranger (Set of 2)
Sail through the skies with this incredible ranger ready to thrill players as a fearsome foe or serve as your next playable character miniature!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: James Dorrington
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Birdfolk (Cae'lan) Ranger (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Ghost Dragon Reposes
Ghost dragons stalk the Golden Plains and haunt the lairs of their demise. Often formed when mother dragons are killed along with their brood, a ghost dragon is a fearsome opponent Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ghost Dragon Reposes is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Blasted Isle Colony Buildings (Set of 3)
A great place to crash if you want to get out of the heat. This set includes the following models:
Bone Hut (3 parts)
Rock Hut (2 parts)
Tent OVer River (5 parts)
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Blasted Isle Colony Buildings (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Lava Streams (Set of 4)
Turn up the heat with these lava streams, they will have your players screaming "THE FLOOR IS LAVA!" All session long. This set includes 4 lava streams.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Lava Streams (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Blasted Isle Dwellings (Set of 4)
Camp out in a small dwelling or use these entrances as easy to drop-in scatter for any setting.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Blasted Isle Dwellings (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Frost Giant Axe Master
A huge-sized giant with a double-sided axe, she can spin that sucker around and before you know it half a contingent of soldiers is beheaded...
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: James Dorrington
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Frost Giant Axe Master is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Blasted Isle Small Scatter (Set of 4)
Fill your burning regions with these small pieces of scatter and turn up the heat!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Blasted Isle Small Scatter (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Blasted Isle Small Scatter (Set of 5)
Decorate your volcanic regions with scatter to immerse your players. This set includes 5 pieces of small scatter.
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Blasted Isle Small Scatter (Set of 5) is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Blightborn Cabal (Set of 5)
Torment your players with the Blightborn cabal, a perfect villainous group for spreading suffering, disease, and mayhem!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Gaetan Grey
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Blightborn Cabal (Set of 5) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Blink Bulettes (Set of 2)
Blink Bulettes are a subspecies of bulette capable of slipping in and out of the Ethereal plane, surprising your players at every turn! Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: José Luis Hernández
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Blink Bulettes (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Bone Golem
The rattling of bones is followed by the pulverizing blow of this horrific bone golem's battering ram! Sized to fit on a 75mm base this undead creature is ready to shamble its way into your games.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Jay
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Bone Golem is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Borer Mite Queen
"My Queen" this 75mm based queen of the borer mites demands respect, and if you don't give it to her... she's probably going to burst up beneath you and rip off your legs sooo.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Brandon Leech
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Borer Mite Queen is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Borer Mite Warriors
50mm borer mite warriors ready to chop players in half with their pincers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Brandon Leech
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Borer Mite Warriors is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Borer Mite Workers
Adorable and terrifying, these borer mites are ready to chew through your player's plans!
25 mm bases with multiple variants for a small army of borer mite workers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Brandon Leech
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Borer Mite Workers is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Bridge and Ramps (Set of 16)
Connect bridges, ramps, and ladders to form intricate walkways and harrowing adventures for your players.
This set includes 13 bridge/ramp pieces and 3 ladders.
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Bridge and Ramps (Set of 16) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Bridges and Ladders (Set of 8)
Climb up, down, and over with this set of 8 bridges and ladders.
From well-constructed bridges to rickety rubble, these structures add flavor to any game.
This set is supportless and prints with no additional slicer supports. Some files are supported for printing in resin on printers as small as the Sonic Mini.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Bridges and Ladders (Set of 8) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Burning Soul Elementals (Set of 3)
The spirits of those slain by the Ylvalan empire sometimes come back with a BURNING vengeance! Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Elisa Galindo
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Burning Soul Elementals (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Cages (Set of 3)
Trap your players or have them free NPC's from the clutches of these innovative cages, adding unique character to any game.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Cages (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Carrion Crawlers (Set of 2)
Creep into your players hearts with these two carrion crawlers.
Each crawler is built for a 50mm base, with a really fun "lurker" dangling from above.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Matt Gubser
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Carrion Crawlers (Set of 2) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Crumbling Stairs
Is it an ancient temple? An entrance to a lost city? A relic of a time of old? Who knows... but your players are going to love it.
This set includes 1 crumbling stairs.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Przemysław Słowiński
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Crumbling Stairs is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Cutest Baby Creatures (Set of 4)
These adorable little babies are sure to have your players saying "aweeee" and looking for a way they can bring one home (or adventuring) with them.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Alex Huntley
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Cutest Baby Creatures (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Cutie Pie Baby Creatures
These adorable little babies are sure to have your players saying "aweeee" and looking for a way they can bring one home (or adventuring) with them.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Alex Huntley
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Cutie Pie Baby Creatures is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Dead Townsfolk (Set of 5)
Look what they done to these poor folk! Time for some brave adventurers to avenge the deaths of the common people!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Dead Townsfolk (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Desert Rock Formations (Set of 4)
Crawl to the top of these incredible desert rock formations perfect for a badlands, arid environment and more!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Desert Rock Formations (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Dire Crocodile
Crickey! That's a big one! Scaled as a huge miniature to fit on a 75mm base this dire crocodile is sure to inspire terror or bring out the inner crocodile hunter in your games.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Blank
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Dire Crocodile is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Doom-A-Pault
That's right, a mobile doom-a-pault to launch trash kobolds into battle.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Doom-A-Pault is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Entombed Crystal
Behold the mysterious frozen crystal. Is it a valuable gemstone? An ancient relic of times of old? Who knows...
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Entombed Crystal is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Ethereal Warden
An ethereal warden plus repose to serve as a ghostly member of your party or a dangerous opponent.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Elisa Galindo García
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ethereal Warden is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Etterochs (Set of 2)
These horrifying monsters are formed when an aranai fails its metamorphosis, a terrifying fate for the spiderfolk, and an even more horrifying creature to creep onto the table.
2 etterochs scaled for 25mm bases.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Etterochs (Set of 2) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Evolved Heartwood Trees (Set of 3)
These strange trees include water pouring from them, large openings to walk through, and massive canopies to hide under.
Evolved Heartwood Trees (Set of 3) includes the following 3D printable models:
Double Tree
Open Tree
Water Tree
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 205mm x 65mm x 50mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Evolved Heartwood Trees (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Feykoo Kobolds (Set of 2)
Clever druids, wondrous sages, and wise guides and protectors of knowledge. These iconic kobolds are a great addition to any game.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Feykoo Kobolds (Set of 2) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Fire Elemental
As beautiful as it is terrifying this fire elemental is sure to heat up your games!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Lucas
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Fire Elemental is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Food Cart
"Noodles! Get your noodles!" This cart serves as a hilarious point of roleplay for any party lucky enough to come across it.
This set includes 1 food cart split into 3 pieces. Miniature STL not included.
This set is supportless and prints with no additional slicer supports needed. This file has also been supported for printing on the Phrozen Sonic Mini.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Food Cart is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Food Stand
Serving as both a barricade and a food stand, this unique shop is full of flavor.
This set includes 1 food stand split into 3 pieces.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Food Stand is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Frozen Pillars (Set of 2)
Frozen pillars with platforms for players or enemies to stand on.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Frozen Pillars (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Ghost Dragon
Ghost dragons stalks the Golden Plains and haunt the lairs of their demise. Often formed when mother dragons are killed along with their brood, a ghost dragon is a fearsome opponent Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ghost Dragon is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Giant Rats (Set of 3)
Giant Rats (Set of 3)
Every adventure needs a nice little infestation of rats to clear out, or.... in this case a nice GIANT infestation.
Challenge your new players with these classic monsters, or put a new spin on them for your veteran table members.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Alessandro Depaoli
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Giant Rats (Set of 3) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Giant Werewolf
Sized for a 4 inch gargantuan base this werewolf will make your players howl for mercy!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Giant Werewolf is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Golari Lodge
Rest your cold feet before the fires of a golari lodge! A perfect setting for a winter retreat.
This set includes 1 Lodge split with a playable interior.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Golari Tent
Set up camp in this wondrous golari tent, with a playable interior and removable roof!
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Golari Watchtower
Look out for arctic threats with this incredible golari watchtower! Sure to withstand MANY undead frost giant attacks.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Golden Plains Scatter (Set of 6)
Spruce up your table with some desert/plains terrain, sure to leave your party THIRSTY for more.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Golden Plains Scatter (Set of 6) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Great Horned Carnotaurus
Kobolds often ride these massive creatures into battle, though... since they are so hard to control, often the riders become a quick snack for this massive beast!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Great Horned Carnotaurous is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Great Horned Carnotaurus With Howdah
Kobolds often ride these massive creatures into battle, though... since they are so hard to control, often the riders become a quick snack for this massive beast!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Great Horned Carnotaurous is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Great Horned Carnotaurus Zombie
Run... just RUN! It's big, it's bad, it's lumbering your way on rotting legs. This carnotaurus zombie is sure to strike fear into the hearts of even the most stalwart adventurer.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Great Horned Carnotaurus Zombie is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greater Plague Carrier
Better run..... this gargantuan plague carrier has scores of skulls strapped to its back and is a harbinger of disease and death guaranteed to disgust and thrill anyone gathered around your table.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greater Plague Carrier is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Greymill Extras (Set of 18)
Add a touch of flair to your homes, taverns, or temples with this set of extra scatter. Greymill Extras (Set of 18) includes the following:
Bench
Cart
Crates and Barrels
Gaming Table
Wood Chair
Woodburning Stove
Bookshelf
Picnic Set
Fire Skewer
Torch
Pillows
Potted Bush
Floral Bush
Shrine
Spear Wall
Trunk Table
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: Any size
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Extras (Set of 18) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Furniture (Set of 12)
Dress up your buildings with these unique pieces of furniture. Greymill Furniture (Set of 12) includes the following:
3 tables
3 beds
2 chests
2 chairs
1 cabinet
1 drawer
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: Any size
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Furniture (Set of 12) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Laborers, Storytelling (Set of 5)
Populate your towns with lovable NPC's to tell fantastic stories and serve as quest givers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Laborers, Adventuring (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Laborers, Adventuring (Set of 4)
Populate your towns with lovable NPC's to tell fantastic stories and serve as quest givers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Laborers, Adventuring (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Inn
Fill your table with fantastic buildings like the Greymill Inn! Complete with playable interior.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Pinyo / Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Lumber Mill
Fill your table with fantastic buildings like the Greymill Lumber Mill! Complete with playable interior.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Pinyo / Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Outsiders (Set of 5)
Populate your towns with lovable NPC's to tell fantastic stories and serve as quest givers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Omnioji
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Greymill Outsiders (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Pier House
Let your adventurers retire in style with this pier house, with a playable interior, it makes the perfect coastal getaway... or site for a strange aquatic cult to gather... whatever.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Pinyo Gulashart
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Pier House is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Townsfolk ( Adventuring Set of 4)
Townsfolk can adventure too! Just try starting trouble with the Greymill NPC's and most parties will quickly regret their decision to start trouble.
Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Townsfolk ( Adventuring Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Greymill Townsfolk ( Storytelling Set of 4)
Townsfolk can adventure too! Just try starting trouble with the Greymill NPC's and most parties will quickly regret their decision to start trouble.
Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Greymill Townsfolk ( Adventuring Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Heartwood Bridge Expansion (Set of 9)
Connect your treetop houses or span chasms with these bridges.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Heartwood Bridge Expansion (Set of 9) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Heartwood Town Square
Gather on the massive platform of the Heartwood town square, sharing stories or battling deadly foes invading this forest home.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Heartwood Trees (Set of 3)
Travel deep into the woods with these towering trees.
Heartwood Trees (Set of 3) includes the following 3D printable models:
Bent Tree
Hug Tree
Swirl Tree
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 205mm x 65mm x 50mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Heartwood Trees (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Ice Cultists (Set of 3)
These cultists are really taking dedication to a whole new level with ice covered arms dragging on the ground!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Artem Bespalov
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ice Cultists is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Ice Elemental
Spines of ice and bits of snow dot this elemental, scaled to fit a 25 mm base.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Artem Bespalov
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ice Elemental is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Icy Pines (Set of 3)
3 new snow-covered pines to add some foliage to your tundra scenes!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Icy Pines (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Icy Rock Formations (Set of 5)
Slip and slide across these great ice formations!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Icy Rock Formations (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Iron Golem
"This is the Way" to instill fear in the hearts of your players!
Cracking its metallic knuckles and scaled to fit on a 50mm base this iron golem is ready to rumble.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Iron Golem is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Jagged Ice Crystals (Set of 5)
Watch out for the spikes!
These icy formations are sure to look beautiful on any table and consist of 5 formations to add life to your games.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Jagged Ice Crystals (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Junkyard
It's not just a junkyard... it's home! Live it up in this dilapidated yard filled with trash no one but a trash kobold could love.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Junkyard is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Burrow
A charming little burrow for kobolds (or perhaps a halfling or two) to spend their days. Comes complete with your very own spyglass for watching those pesky neighbors.
This set includes 1 kobold burrow.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Burrow is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Camp (Set of 3)
Take a load off and relax in one of these three kobold camp tents. Perhaps a play is taking place inside one of them, or a kobold is putting together a wicked trap to vex any who cross into the camp. This camp set provides endless opportunities for adventure.
This set includes 3 kobold camp tents.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Camp (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Gate
"Halt! None may enter the land of the kobold king without paying a tribute of 12 spoons!"
This gate serves as a wonderful addition to your games, filled with flavor and a fair amount of OSHA violations.
This set includes 1 kobold gate, split into two pieces.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Gate is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold King's Court (Set of 6)
The kobold king has many subjects, a cook to keep him well fed, a bard to play him the songs of his people, a waiter, a shaman, and an inventor to help craft his insane ideas.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Max Maurel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Kobold King's Court (Set of 6) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Scatter (Set of 7)
What better way to flesh out your kobold camps, villages, or dungeons than planting small traps and pieces of scatter to engage your players?
This set includes:
Box Trap
Bone Fence
Pot Fire
Fence Dummies
Skull Barrel
Small Wall
Traps
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Scatter (Set of 7) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Scavengers (Set of 5)
The kobold scavengers are here to steal your junk! They craft it into terrifying weapons! What is more horrifying than a kobold with a molotov cocktail? Or armor made using spoons?
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Max Maurel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Scavengers (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Trashguard (Set of 6)
Behold! They come in barrels, they come with spears! They come to take your trash and drink your beer!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Max Maurel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Kobold Trashguard (Set of 6) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Tunnels
"Hi ho, Hi ho, into the depths we go, with a big pickaxe and some guy named max hi ho, hi ho hi ho hi ho"
Kobolds delight in digging tunnels, and your players will love venturing down into the depths or fighting their way to the top of these tunnels!
This set includes 1 kobold tunnels.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Tunnels is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Kobold Wall
No better way to stop pesky adventurers from entering your camp than a wall made of garbage am I right?
This wall can serve as a gate, terrain on which to do combat with annoying kobolds and more!
This set includes 1 kobold wall, split into four pieces.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Kobold Wall is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Lava Bridges (Set of 2)
The floor is lava! Hop on one of these bridges and save yourself!
This set includes 2 lava bridges.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Lava Bridges (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Lava Spikes (Set of 4)
Spikey rocks emerge from the bubbling lava, cause I mean... we gotta make the lava terrain more dangerous you know?
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Lava Spikes (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Lava Structures (Set of 3)
Thrill your players with crumbling structures surrounded by lava!
This set includes 3 lava structures.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Lava Structures (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Lava Walls (Set of 2)
Talk about a firewall! These walls are great for any magma filled chamber, hellish realm, or just to spice things up.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Lava Walls (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Lurking Terror
This gargantuan creature is split to fit on resin and fdm printers and comes clutching stalagmites with its many... MANY tentacles.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Lurking Terror is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Magmin (Set of 3)
These adorable little scamps are sure to heat things up!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Alex Huntley
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Magmin (Set of 3) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Maned Leviathan
Just keep swimming, just keep swimming, away from this monster! A gargantuan beast ready to swallow players, sink ships, and cause general mayhem!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Maned Leviathan is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Moonlit Golari (Adventuring set of 6)
Vex your players with hulking Golari foes! Play a hardened Golari veteran or a tricksy golari spellcaster with these wondrous models ready to jump into your games.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine VanPatten
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Moonlit Golari (Adventuring set of 6) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Moonlit Golari (Storytelling set of 6)
Tell tales of the far north and frozen tundra with these well equipped and exciting Golari.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine VanPatten (Moonlight Minis)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Moonlit Golari (Storytelling set of 6) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Na'Tarri (Wood) Elf Casters (Set of 3)
These elven spellcasters are ready to control battlefields, charm enemies, and blast their way through anything that threatens their woodland home.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Ronald Bondoc
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Na'Tarri (Wood) Elf Casters (Set of 3) is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Na'Tarri Elf House
Delve deep into the forests and enjoy this incredible Na'Tari house complete with playable interior!
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Ddi Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Na'Tarri Elf House (Tower)
Delve deep into the forests and enjoy this incredible Na'Tari house complete with playable interior!
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Otyugh
Ewww At least it doesnt have a gross version with a big tongue to lick the player... oh my gosh!
This set includes two grotesque otyughs to add a new level of gross to your games.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Jakub Kakpersky
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Otyugh is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Overgrown Foliage (Set of 5)
Creeping across forest floors, ancient temples, and overgrown cities, this foliage scatter serves as a great and immersive addition to any table.
This set includes 5 pieces of overgrown foliage.
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Przemysław Słowiński
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Overgrown Foliage (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Overgrown Head Statues (Set of 2)
Who created these statues? Why are there massive stone heads lying on the forest floor? An aura of mystery and intrigue surrounds these crumbling relics.
This set includes 2 overgrown head statues.
This set is supportless and prints with no additional slicer supports. These models have also beenpresupported for resin printingon a Phrozen sonic mini.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Przemysław Słowiński
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Overgrown Head Statues (Set of 2) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Overgrown Pillars (Set of 4)
These overgrown pillars and wall can serve as hiding spots for lizardfolk, dungeon dressing for ancient temples and overgrown jungle floors.
This set includes 3 pillars and 1 overgrown wall.
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Przemysław Słowiński
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Overgrown Pillars (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Overgrown Rocks (Set of 4)
Creeping vines and crawling brambles cover these rocks, great for any ancient temple!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Overgrown Rocks (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Phase Panthers (Set of 3)
Some kitty cats are a bit more dangerous than others but at least one of these phase panthers is content to simply recline on its rock in the sun... for now.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Jakub Kakpersky
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Phase Panthers (Set of 3) is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Pine Trees (Set of 2)
2 tall pines to add some foliage to your tundra scenes!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Pine Trees (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Raging Soul Elementals (Set of 2)
The souls of those who lose their lives in the fires of the blasted isle sometime coalesce into the forms of horrid monsters, hoping to drag players, into the lava that formed them. The result are these raging soul elementals - perfect to roast your players! Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Elisa Galindo
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Raging Soul Elementsl (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Red Renders (Set of 3)
Leaping from lava or crouching behind rocky outcroppings, these large-sized red renders are ready to hurl all manner of hellfire at your players!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: José Luis Hernández
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Red Renders (Set of 3) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Ribs Camp
Why not make a campsite out of the corpse of a giant.... what the heck is that skeleton from anyway?
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ribs Camp is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Rock Formations (Set of 5)
Dress your table up with some HOT rock formations, perfect for volcanic adventures or structures of the abyss. This set includes 5 rock formations.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Rock Formations (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Rock Formations (Set of 6)
Crawl to the top of these incredible desert rock formations perfect for a badlands, arid environment and more!
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Rock Formations (Set of 6) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sewer Halls (Set of 5)
Delve into the sewers beneath your towns and cities with this set of modular sewer hall scatter. This set includes 5 sewer halls.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Sewer Halls (Set of 5) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sewer Hideout
A massive building with multiple playable floors, this sewer hideout is great for thieves, wererats, and other subterranean denizens.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Sewer Hideout is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sewer Pipes (Set of 6)
Dress up your sewers, dungeons, and mad alchemist towers with this set of 6 sewer pipes.
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Sewer Pipes (Set of 6) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sewer Shacks (Set of 2)
Thieves, wererats and beggars hide out in these sewer shacks, perhaps they want to offer your players a deal, or maybe they are just waiting for unwary travelers with full pockets and low Perception scores...
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sewer Shacks (Set of 2) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Ship Building
How this ruined ship was turned into a base of operations no one knows, but one thing is for sure, it makes a striking figure on any table.
Ship Building includes the following:
Ship building with multiple levels providing interior playable spaces
Additional scatter pieces including barrels, planks and towers.
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Ship Building is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sinking Sand Golem
You step into a shallow pool of water only to find your foot begins to sink in! Suddenly, a horrid visage erupts from the sand, a sinking sand golem! Ready to engulf you and your party whole!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Sinking Sand Golem is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Skeletal Drakes (Set of 3)
The rattle of bones is accompanied by a low growl as these three large-sized miniatures barrel onto the battlefield!
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: José Luis Hernández
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Skeletal Drakes (Set of 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Skull Outpost
Hide out in a skull big enough to belong to an elder god! Kobolds can make a house out of anything, and now so can you!
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Skull Outpost is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Small Sewer Scatter (Set of 7)
Create harrowing adventures with these small sewer scatter pieces, serving as barriers, bridges, high ground and more!
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Small Sewer Scatter (Set of 7) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Smoldering Soul Behemoth
The smoldering soul behemoth prowls the lava pits and craggy rocks of the Blasted Isle. Ready to immolate players on a whim. Comes split for 3D printing on resin and FDM printers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Sam King
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Smoldering Soul Behemoth is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Snow Orc Stalkers (Set of 8)
The tundra has never been more dangerous with snow orcs prowling the snowy lands, hunting for game, unwary villages, or foolhardy adventurers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Max Maurel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Snow Orc Stalkers (Set of 8) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Snow Orcs (Set of 8)
The tundra has never been more dangerous with snow orcs prowling the snowy lands, hunting for game, unwary villages, or foolhardy adventurers.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Max Maurel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Snow_Orcs (Set of 8) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Steam Pipes
"I think you turned the lever wrong... I don't think it is supposed to be exploding like that." A great addition to any sewer or mad scientist lab, this playable steam pipe set works well for creating a great sense of immersion.
This set includes steam pipes plus two sizes of modular steam plumes.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Steam Pipes is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Sunken City Arches / Walkways (Set of 11)
Build intricate dungeons with these walkways which are easily stacked for more modular terrain.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sunken City Arches / Walkways (Set of 11) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sunken City Buildings (Set 3)
Incredible modular buildings with multiple playable levels! What more could one want?
Includes:
3 buildings each with variant floor options.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Ian McLachlan (Dragon's Rest)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sunken City Buildings (Set 3) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sunken City Columns (Set of 9)
Raise the roof with these intricately carved pillars of stone.
This set is supportless and prints with no additional slicer supports. Some files are supported for printing in resin on printers as small as the Sonic Mini.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sunken City Columns (Set of 9) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sunken City Core Bridges (Set of 4)
Clamber through ancient halls and ruined caverns with these 4 bridges.
This set is supportless and prints with no additional slicer supports. Some files are supported for printing in resin on printers as small as the Sonic Mini.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sunken City Core Bridges (Set of 4) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Sunken City Stairs (Set of 8)
Enter into dungeons in style with this set of 8 unique stairs.
This set is supportless and prints with no additional slicer supports.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Sunken City Stairs (Set of 8) is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Swamp Trees (Set of 2)
Delve into spooky swamps and misty domains with this swamp tree set.
Swamp Trees (Set of 2) includes the following 3D printable models:
Swamp Tree 1
Swamp Tree 2
This set is supportless and prints with no additional slicer supports needed.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 205mm x 65mm x 50mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Swamp Trees (Set of 2) is a part of the Uncharted Lands Kickstarter, and Blasted Isle Collection, which was made thanks to 3,798 backers.
Tieflings Adventuring (Set of 5)
5 tieflings ready to do battle in the Blasted Isle, serve as incredible player character models, or new foes or NPC's to interact with.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Bernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Tieflings Storytelling (Set of 5) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Tieflings Storytelling (Set of 5)
5 tieflings ready to share tales of the Blasted Isle, serve as incredible player character models, or new foes or NPC's to interact with.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Bernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Tieflings Storytelling (Set of 5) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Ti-Khal Hybrids (Set of 4)
These snake-folk are not messing around, when you hear them hissing it is time to run!
4 ti-khal hybrids scaled for 25mm bases.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Ronald Bondoc
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ti-Khal Hybrids (Set of 4) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Ti-Khal Purebloods (Set of 9)
These snake-folk are not messing around, when you hear them hissing it is time to run!
9 ti-khal purebloods scaled for 25mm bases.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Ronald Bondoc
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ti-Khal Purebloods (Set of 9) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Tower House
Fill your table with fantastic buildings like the tower house! Complete with playable interior.
This set is supportless and prints with no additional slicer supports needed. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY: Pinyo Gulashart / Sebastiano Di Grazia (Ravenskull Studio)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: This collection is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Trapped Hall
The coast looks clear... until you run facefirst into a spiked swinging gate!
This set includes a hallway with a moveable trap to slam into your players.
This set is supportless and prints with no additional slicer supports. Models small enough to fit on a Phrozen sonic mini have also been presupported for resin printing (if applicable).
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 80mm x 85mm x 110mm
SUPPORTS: Supportless
SCULPTED BY: Marko Richter
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Trapped Hall is a part of the Uncharted Lands Kickstarter, which was made thanks to 3,798 backers.
Undead Frost Giant Female
She'll eat your brains like cold spaghetti, and more than likely turn the rest of the party into "snow" angels. Scaled as a huge miniature to fit on a 75mm base this undead frost giant is ready to send a chill down player spines.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Undead Frost Giant Female is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Undead Frost Giant Male
And you thought regular frost giants were bad, this behemoth is sure to send a chill down any player's spine. Scaled as a huge miniature to fit on a 75mm base this undead frost giant is bound to have your players calling out "Coooool".
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Kieran Russel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Undead Frost Giant Male is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
Wererats (Set of 4)
Whether they pick your pocket, slit your throat, bite ya or turn you into a skittering critter of the night, these wererats are sure to leave an impression.
FORMAT: STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: 120mm x 68mm x 130 mm
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Alessandro
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Wererats (Set of 4) is a part of the Uncharted Lands Kickstarter which was made thanks to 3,798 backers.
NOTE: This pledge level is still being fulfilled (objects will be delivered as they are finished). INCLUDES: All Unlocked Stretch Goals for Bosses/Minis/Terrain STLs Blasted Isle Core Collection Greensea Booster Core Collection Golden Plains Core Collection Greymill Sewers Core Collection Town of Greymill Core Collection Kobold Coalition Core Collection Moonlit Mountains Core Collection Sunken City Core Collection 10x High Resolution Digital Battlemaps Uncharted Lands - Digital Copy 10+ Digital NPC Cards Free Ancient Black Dragon STL