3D Printed Party Popper Pistol
3D Printed Party Popper Pistol
Published 2017-06-02T11:39:38+00:00
assembly:
See video !!
Glue: Ordinary superglue
barrel: PVC round 32 mm - 220 mm L
bolts: M5 30
nuts: M5
screws: parker 3.5 W 12 L
Reinforcement plate (not in video): heat the plate until it becomes flexible. press it against the frame to copy the shape. (see picture). attach with superglue, only on one half of the frame. Now you can still take it apart.
3D PRINTING SETTINGS
layer height all prints: 0.3 mm
material: PLA
Barrel A + B
Wall 2.4
Top/bottom 1.2
Infill 20
Body rear A +B
Wall 1.2
Top/bottom 0.9
Infill 10
(higher top/bottom/infill = higher chance of warping. When you have a glass bed with good adhesion you can try
top/bottom 1.2
infill 20)
Front cover
Wall 2.4
Top/bottom 1.2
Infil 40
Front grip
Wall 1.2
Top/bottom 1.2
Infil 20
Hinge A +B
Wall 1.2
Top/bottom 1.2
Infil 30
Hook
Wall 1.2
Top/bottom 1.2
Infil 100
Protector
Wall 1.2
Top/bottom 1.2
Infil 100
Silencer A+B
Wall 1.2
Top/bottom 1.2
Infil 30
Piston
Wall 1.2
Top/bottom 1.2
Infil 100
Trigger cover
Wall 1.2
Top/bottom 1.2
Infil 20
Spacer
Wall 1.2
Top/bottom 1.2
Infil 20
Magnet Cover
Wall 1.2
Top/bottom 1.5
Infil 100
knop
Wall 1.2
Top/bottom 1.2
Infil 100
Side Plate
Wall 2.4
Top/bottom 2.4
Infil 100
Stock
Wall 1.2
Top/bottom 0.9
Infil 10
(higher top/bottom/infill = higher chance of warping. When you have a glass bed with good adhesion you can try
top/bottom 1.2
infill 20)
Trigger pin
Wall 2.4
Top/bottom 1.2
Infil 100
trigger
Wall 1.2
Top/bottom 1.2
Infil 20
Reinforcement plate
Wall 1.2
Top/bottom 2.4
Infil 100
发表的日期 | 02/06/2017 |
让时间去下载 | - 5000 分钟 |
材料数量 | 1 kg + |
尺寸大小 | 420*140*45 |
打印工艺 | FDM |
复杂程度 | 中级 |
支持自定义 | YES |
标题 | 3D Printed Party Popper Pistol |