ADJUSTABLE SMARTPHONE STAND
- 家居产品 |
- 电子产品>
- iPhone>
- Phone stands
ADJUSTABLE SMARTPHONE STAND
3D
Published 2020-05-26T15:53:58+00:00
Smartphone holder in horizontal position, adjustable between 60 and 90º, ideal for video calls, very stable and robust.
You can print the SET PRINT WITHOUT SUPPORTS.stl in less than 3 hours.
or print the pieces in different colors, it will be more fun.
Printed parts
* Top.stl (need supports) or Top with supports.stl (no supports, included mesh supports)
* Bottom.stl
* Adjustable Guide.stl
* M3 Nut wrench.stl
Hardware
* 1 x Screw M3 x 20 mm or more
* 2 x M3 Nut
* Rubber band
* Rubber protection or American tape
- resolution, 0,2 - 0,25
- Infill. 25 %
- PLA
Note
Insert the Top piece laterally into the Bottom piece
You can stick a rubber or American tape on the TOP and GUIDE piece, where it supports the smartphone so that it does not slip.
| 发表的日期 | 26/05/2020 |
| 让时间去下载 | 200 - 分钟 |
| 打印工艺 | FDM |