AECLIP01 - Aztlan Clip On
$12.00 AECLIP01 - Aztlan Clip On
Published 2020-08-24T15:40:24+00:00
Aztlan is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. Aztlan Clip-On was one of our most often requests.
This particular expansion to Aztlan brings clip on walls to the series. Using these walls you can make full floor dungeons, corners, turns and hallways.
This set of terrain is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the home of the Azite Snakefolk and is filled with primal terrors of unspeakable horror. Warring tribes of Azite fight over the control of tombs old and new, while interlopers are disposed of without a morsel of mercy.
TERRAIN Recommended Print Settings:
- Layer Size: 0.15mm recommended, 0.1mm for smoother features
- Infill: 10% recommended for all models
- Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
- Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
- Raft/Brim/Supports: 10+ lines of Brim can be helpful on some machines when printing these models.
发表的日期 | 24/08/2020 |
Price | $12.00 |
支持自定义 | YES |