AEGWEP01 - Trebuchet
$5.00 AEGWEP01 - Trebuchet
3D
Published 2023-01-05T16:01:25+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
This set, Trebuchet, was born from a request by Garret on our Discord. He wanted a working Trebuchet model, and the very talented Colin Christenson set to the task immediately. Within a week the model was ready and firing true. We hope you enjoy this model and use it to wage many glorious campaigns. You can see a video of it firing right here.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| 发表的日期 | 05/01/2023 |
| Price | $5.00 |
| 支持自定义 | YES |