Air Extractor
Air Extractor
3D
Published 2021-11-01T09:29:05+00:00
Working on different projects push you to differents skills and needs. This time I add an adaptor for an Air Extractor and also the adapter for the 4" air duct, for a spray booth. It is a 120mm x 120mm x 38mm AC infinity Cooling Ventilation Exhaust.
You will need four large 4mm screw with nuts to ensambe. And four 4mm screws with nuts to fix it to a 120mm holed surface. Yo can add filter between the grids.
There are four pieces. Extr-Gris, Extr-Base and Extr-Reducer, that don't need support. Extr-Grid-Base does needs support.
0.20 quality heigh, 4 top and buttom layer, may set three wall internal and extarnal and 25% for infill.
-Cura Slicer
-Nozzle temp 205°
-0.4 Hardend Nozzle
-Bed Tempt 60°
-Wham Bam PEX
| 发表的日期 | 01/11/2021 |
| 让时间去下载 | 16 - 17 分钟 |
| 材料数量 | 183 |