In the video I posted here, it was not obvious that all deckboxes are available in both portrait and landscape "mode" youtube.com/watch?v=nuj619wV5ZI&ab_channel=CyrexTableTop The Picture below shows a landscape USA MINI deckbox and the other picture a Portrait MTG and Euro Medium DeckBoxes These prints have been done very fast, so please don't judge print quality !

Updated the scrips based on feedback that the clearances was broken.. Should be fixed now - I might add a bigger range of clearances to the next update.

Super happy with this. Printed some custom datacards for my Warhammer army a while back and Svend was super helpful at generating me some custom deckbox files that fit them perfectly. The files printed great, we needed to tweak the tolerances a little bit but he was super communicative about the process and helped me get the perfect set-up. Printed the bottom half in Elegoo Black PLA, the top half in eSUN Gold PLA+ at 0.2 layer height. I printed the game-datacards size at size_50 with LidCoverage_20, and printed a few of the spacers in between. Just a note, I embossed the logo into the files myself, logos do not come with this pack! I did this with Fusion 360 and it was fairly simple to do. Hugely recommend this pack if you want some specifically sized deckboxes to your liking. Get in touch with Svend if you don't see the size you need, he's super helpful!

HI, Just wanted to print this deckbox for my son and realized that I needed a smaller "insert box" to make it nice. So I just released Version 3.0 of these deckboxes, where the "insert boxes" are sweeped from 10mm -50mm in steps of 5 mm. !

Just created a deckbox for RadLands, as the standard box does not hold sleeved cards.. I think I hit the color scheme pretty well. The small box inside holds the tokens.

A landscape version of a MTG sized Deckbox to hold Colosus

Just printed a deckbox for "Cockroach Poker". I chose "top cut, 10 mm lid coverage. size: 30 mm (internal)". perfect fit

Great News!! I just ported the rounded corners from my Card Boxes to the Deckboxes. This gives a total of more than 150.000 STL files in this! Below you see my 60 cards sleeved burn deck in size 60mm with center cut-out and a lid overhang of 10mm. Inside I have a 20 mm box for dice. The rounded boxes are now my favorite, it gives a nice feel to it. However both versions are available for you to download.

Heh, I'm going on a business trip to the "east" where business cards matters. Then I realized that I could use a deckbox as a business card organizer :-) and use the dividers to sort them :-) . a bit silly, but useful nevertheless

Here is a picture from the latest release. It shows a red box with square corners and a blue with rounded corners. Its hard to see on the image, but I think the feel is better with the rounded corners. I might choose to discontinue the "hard corners" unless some has an opinion. I accidentally printed the blue box lid too high..

Printed these off on my Mars 3 Resin printer and they came out great! I need to do some sanding down, I added some of my own supports (I didnt do them right, left little clearance and they were almost fuzed because of myself) Just need to sand things down a little on the bottom of the deckbox where the supports were and also the top of the lid where I also had supports. Very happy going to do another one with correct supports and double check things :-P after sanding things I will paint it when I have free time.