Here is my second set of replacement arcade joystick tops (and skirt) that I have designed to work with your standard Sanwa type joystick, that have a screw thread.

They are push on to fit and don't require screwing.

This set has more of an emphasis on BIG.
JST_BIGball (71x71 vs 35x35), JST_BIGdome being like the previous but cut into half and JST_capsule being like two normal ball tops stacked up. Also included is the biggest wave skirt which is a disc replacement but with more... flare.

I have tested them with a variety of different Sanwa clones and the fit varies but only a little, a first time fitting can be a little fiddly but they also don't come off easy so I see that as a good thing. Mind you don't trap your fingers between the top and your control board when the blighter suddenly drops on.

_4415H in the file name means: 4 top layers, 4 bottom layers, 15% infill & H is Hex infill.
_445L means: 4 top layers, 4 bottom layers, 5% infill and L is Line infill

THE STL FILES FOR THIS DESIGN ARE AVAILABLE THROUGH MY PATREON & PATREON SHOP.
patreon.com/3DFreeman

You could join up for a month and download the STL files for all my designs or you can now buy bundles from my Patreon shop for $3

I also have a Thingiverse page:

thingiverse.com/3dfreeman/designs

Here's a non-affiliate ebay link to the type of cheap and cheerful Sanwa clone I use:

https://www.ebay.com.au/itm/334119951114?hash=item4dcb19db0a:g:Ka0AAOSwaqxhHjfn&frcectupt=true

Thanks for checking out my designs.
Print Settings
Printer:

Aquila X2
Rafts:

No
Supports:

No
Filament brand:

Voxelab
Filament material:

PLA
Notes:

Take care with how sticky the JSS_wave3 skirt can be on your print bed. I intend to test out some different methods, for example segmenting the underside of the base so it doesn't promote the suction cup effect big circular bases do.