Intended for 3D print.

Futuristic spacemen, ready for any interstellar horror. A regiment's worth of armored and airborne astronauts wielding photon carbines, monofilament katanas and high-explosive rocket launchers. This is the rocketpack-wearing version of the Astroknights, who are also available in several other variants (links below).

https://www.myminifactory.com/object/3d-print-145945

https://www.myminifactory.com/object/3d-print-ork-astroknight-megapack-147131

This megapack includes 25 unique Astroknights either flying through the air, climbing obstacles, or moving on ground level (several can be used in either function). It also includes a number of different smoke plumes that can be used as stylish flying stems (use the image gallery to find a number of suggested poses).
It also, also includes four different bases for your miniatures, two of which sports large streetlights to pose your miniatures beneath (or why not on top of?). It also, also, also includes a separate laser carbine that you can glue to your miniatures if you feel they ought to be carrying more firepower (suggested position is on the backpack, between the twin fuel tanks). Finally, it includes a hovering globe with reticules and other electronic devices, to be used as an accessory for commanders and other characters concerned with the strategic aspects of the battle.

Detailed list

The Astroknight Rocketmen Megapack contains the following models:

1 Astroknight Rocketman with twin forearm gauss cannons
1 Astroknight Rocketman with twin photon cannons
1 Astroknight Rocketman with katana and gauss pistol, firing his boot thrusters to cushion his landing
1 Astroknight Rocketman with photon carbine, climbing an obstacle
1 Astroknight Rocketman with monofilament katana, flying through the air
1 Astroknight Rocketman with dual monofilament katanas, crouching
1 Astroknight Rocketman with photon carbine, aiming while twisting in the air
1 Astroknight Rocketman with photon carbine, aiming while walking
1 Astroknight Rocketman with photon carbine, walking on patrol
1 Astroknight Rocketman with monofilament katana, climbing an obstacle
1 Astroknight Rocketman with photon carbine, walking on patrol (visored version)
1 Astroknight Rocketman with revolving rocket launcher
1 Astroknight Rocketman strategos with cane and pipe
1 Astroknight Rocketman with photon carbine walking
1 Astroknight Rocketman with gauss pistol, doing a heroic takeoff
1 Astroknight Rocketman with photon carbine, running or flying
1 Astroknight Rocketman without weapons, flying through the air
1 Astroknight Rocketman with gauss pistol, twisting in the air
1 Astroknight Rocketman with dual monofilament katanas, landing
1 Astroknight Rocketman with photon carbine, on flying patrol
1 Astroknight Rocketman with photon carbine and goggles, running
1 Astroknight Rocketman general, with mechanical claws and wings (version 1)
1 Astroknight Rocketman general, with mechanical claws and wings (version 2)
1 Astroknight Rocketman with photon carbine, pointing to target while twisting in the air
1 Astroknight Rocketman with shoulder-mounted gauss cannon
1 Strategic Globe
1 Crescent-shaped smoke plume (flying stem)
1 Crescent-shaped smoke plume close to ground (flying stem)
1 Corrugated Iron base with 4 smoke plumes (to be used with the Strategic Globe)
1 Corrugated Iron base with shattering streetlight
1 Corrugated Iron base with streetlight
1 Corrugated Iron base with dual smokeplumes (flying stem)
1 Thin Smoke Cloud (flying stem)
1 Thick Smoke Cloud (flying stem)
1 Dual Streaming Smoke Plume (flying stem)
1 Dual Streaming Smoke Plume reversed (flying stem)
1 Small Smoke Plume version 1
1 Small Smoke Plume version 2
1 Dual Smoke Plume merging into one at ground level (flying stem)
1 Spiralling Smoke Plume
1 Spiralling Smoke Plume (reversed)
1 Photon Carbine in holster
Each model can be printed in unlimited numbers (duh...), so you can expand the company to an entire army should you want to.

The models are packaged in 2 .stl files. The first file contains all Astroknight Rocketman models, smoke plumes, decorated bases and holstered photon carbine. The models are laid out in a square pattern*, and individual models can easily be cut out using the slicing software of your choice. The second file contains a plain, unadorned corrugated iron round base.

*UPDATE 20210815 : All model parts separated and put into their own .stl files. Files added to product as .rar archive.

The models are intended for print in 20mm to 28mm scale, but can be resized to suit any scale.

The models are easy to paint, and requires minimal assembly.

If you have any questions or comments, feel free to send me a message.

Anyone interested can follow me on Instagram, under this handle: #sharedogminiatures