Barrel Support and Pew-Pew end screw on thread
Barrel Support and Pew-Pew end screw on thread
Published 2022-01-24T17:27:27+00:00 • Remixed from Mandalorian Rifle
I broke my Pew-Pew end while sanding (before attaching to the barrel). Thought this would suck if it broke after the rifle was completed. Depending on the print quality, you can easily snape off the end. Came up with the idea to screw on the end (kind of similar to a blade on the end of a US Civil War rifle).
The only thing changed from the orignal part is that the ends are now threaded. You might need to sand down the treads to get it to screw on nicely (Used Fusion 360 for the threads). DO NOT OVER TIGHTEN !! There might be a slight gap between the ends. Screw it on until it lights up nicely with the rest of the rifle.
Print the same as the original files (Barrel Support Front & Optional Pew-Pew End Back)
发表的日期 | 24/01/2022 |
支持自定义 | YES |