Blade runner neon dragon.
Blade runner neon dragon.
3D
Published 2020-09-24T15:55:15+00:00
I made a 3d-printed neon-ish dragon, inspired by blade runner. The mandarin words "Noodle House" (mien guan) Are also here, but on separate rectangles you don't have to print if you don't want to. As seen here it's about 36" x 24", All walls are 1mm. It's about 1kg spool of white filament. 30cm x 30cm printer recommended, unless you want to re-squarify the .step file. It's about 80 hours between all 7 dragon tiles.
Designed to be used with Ws2812 RGB LED strips like this.
https://www.amazon.com/gp/product/B01CDTEG1O/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1.
In motion I must say it looks pretty cool. Print in a white PLA.
The dragon itself is about 1 6' strand. Note you'll need something like a 10A 5V power supply and controller as well. Internet is full of tutorials about these things so go nuts. Place the strand facing inwards on the outside of the dragon. Drill some holes to route the wiring out the back.
Printed on an Artillery X1, in white PLA.
| 发表的日期 | 24/09/2020 |
| 让时间去下载 | 4800 - 分钟 |
| 材料数量 | 1000g |
| 尺寸大小 | 36"x24" |
| 支持自定义 | YES |