Blink Fox
Published 2018-07-24T16:42:04+00:00
Support Free
Featured
51,382
views
13,514
downloads
24 comments
Is it a print picture of the object?
Loading comments...
Blink Fox
Published 2018-07-24T16:42:04+00:00
Printing Details
No supports needed.
Technical Information
| 发表的日期 | 24/07/2018 |
| 支持自定义 | YES |
Object Parts
Share 3D Post on Facebook
×
Printed on: 3D Felix Pro 1
Material: PLA
Posted at: 26th July 2018
Loading comments...
Printed on: Prusa i3 MK2 Kit
Material: Others
Posted at: 01st August 2018
Printed in Herz Metallic Ros PETG at .1 layer heights.
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 05th August 2018
https://www.youtube.com/channel/UCYe8uTTnR_Pe3uIemazNO5w?view_as=subscriber
Loading comments...
Printed on: Prusa i3 MK2 Kit
Material: PLA
Posted at: 05th August 2018
0,15 mm layer height, no support 3 hours printing
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 06th August 2018
Scaled to 50% 0,1 mm layer height
Loading comments...
Printed on: HyperCube 3D Printer
Material: Others
Posted at: 07th August 2018
115% Scale Filament PM - PETG transparent violet 0,2mm layer @ HEVO
Loading comments...
Printed on: Anet A8
Material: PLA
Posted at: 09th August 2018
Printed with 0.5mm nozzle at 0.15mm layer height using Inland PLA+.
Loading comments...
Printed on: Wanhao Duplicator 9
Material: PLA
Posted at: 06th September 2018
Loading comments...
Printed on: Anet A8
Material: PLA
Posted at: 08th September 2018
Amazing model, really liked the way it came out! Printed with Creozone filament at 0.2mm.
Loading comments...
Printed on: Wanhao Duplicator i3
Material: PETG
Posted at: 09th September 2018
This is a Blink Fox. It was printed with Atomic Filament's "Starry Night" PETG filament. 0.24 mm Layer Height 260C / 80C No Infill
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 20th September 2018
Loading comments...
Printed on: Anycubic i3 Mega
Material: PLA
Posted at: 01st October 2018
Anycubic Chiron et PLA anycubic https://www.youtube.com/watch?v=Ibu5MoPrdks&t=5s
Loading comments...
Printed on: 2014 Series 1 3D printer
Material: PLA
Posted at: 09th October 2018
Awesome model. Prints really nice.
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 14th October 2018
40% scale, 0.2 resolution, no infill, no supports
Loading comments...
Printed on: Sindoh 3DWOX 1
Material: PLA
Posted at: 20th November 2018
Excellent design and print!
Loading comments...
Printed on: DIY/Homemade
Material: ABS
Posted at: 03rd December 2018
Printed @ .15lh in light blue abs from iprint3d
Loading comments...
Printed on: Anycubic Kossel Linear Plus Delta 3D Printer
Material: PLA
Posted at: 09th December 2018
Loading comments...
Printed on: Creality Ender 4
Material: Others
Posted at: 15th December 2018
SBS transluent plastic, nozzle 0.6, layer 0.15.
Loading comments...
Printed on: QIDI Tech
Material: PLA
Posted at: 23rd December 2018
Res.: 0,1mm spraying with copper spray and painted with acryl colors
Loading comments...
Material: PLA
Posted at: 27th December 2018
Fox printed 0.1
Loading comments...
Printed on: BIQU Thunder
Material: PLA
Posted at: 14th January 2019
One of my favorite prints that I have done in a while. Thank you for this model.
Loading comments...
Printed on: Monoprice Maker Select V2
Material: PLA
Posted at: 22nd January 2019
Putting the glow in the fox. Printed with zero bottom layers and no infill out of translucent PLA. One small chunk of tail couldn't print, but otherwise worked well. After trying and failing to find a correctly colored LED, I stuffed EL wire in it instead.
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 22nd January 2019
This is an awesome model thank you
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 24th January 2019
CR-10 S4 3D Printing Canada Value PLA
Loading comments...
Printed on: Ultimaker 2+
Material: PLA
Posted at: 24th January 2019
Printed on Ultimaker 2+ using the FilamentOne PLA PRO SELECT Traffic Red from https://www.filamentone.com PRO SELECT filament: https://www.filamentone.com/collections/pro-select Phrozen Shuffle XL: https://www.filamentone.com/collections/3d-printers/products/phrozen-shuffle-xl-lcd-3d-printer Phrozen Shuffle: https://www.filamentone.com/collections/3d-printers/products/phrozen-shuffle-lcd-3d-printer 3D Printing Filaments: https://www.filamentone.com/collections/3d-printing-filament 3D Printing Resin: https://www.filamentone.com/collections/3d-printing-resin Fun To Do Resin: https://www.filamentone.com/collections/fun-to-do E3D-Online accessories: https://www.filamentone.com/collections/e3d-online Bondtech: https://www.filamentone.com/collections/bondtech Learn more at https://www.filamentone.com
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 31st January 2019
Loading comments...
Printed on: Anycubic Photon
Material: Resin
Posted at: 27th February 2019
Nice print in resin
Loading comments...
Posted at: 19th April 2019
I tuoi progetti sono molto belli
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 21st April 2019
Printed with ~0.2mm layer height with white PLA, then painted with acrylic paint. First completely with cyan, then added darker and lighter cyan colors for shading. (Cyan -> Cyan + Black -> Cyan + White)
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 12th May 2019
Top Design! Thanks!
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 19th May 2019
Top model!
Loading comments...
Posted at: 19th May 2019
Thank you ! My 3-year old daughter loves it ! Very easy to print and really well detailed.
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 30th May 2019
Loading comments...
Printed on: Anycubic Kossel Linear Plus Delta 3D Printer
Material: ABS
Posted at: 14th June 2019
%50 scale 0.1mm layer height %5 infill love it!
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 28th June 2019
Great design!
Loading comments...
Printed on: Wanhao Duplicator i3 PLUS
Material: PLA
Posted at: 14th July 2019
0.12 mm layerhight, 0% infill, 3 shells. The print took 15 hours and 58 grams of material. Painted with an airbrush and the velejio air colours.
Loading comments...
Printed on: Anycubic
Material: PLA
Posted at: 01st November 2019
thx awesome model
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 14th November 2019
Muy bonito, reducido al 25% y sigue teniendo mucho detalle.
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 26th November 2019
Thank you! its a perfect Modell no need support My Friedn painted it...With a brush! ia cant believe :O
Loading comments...
Printed on: Artillery Sidewinder X1
Material: PLA
Posted at: 08th January 2020
Very nice, wonderful Model. Thank you. Printed with Geeetech Silk Copper. LH 0.12mm
Loading comments...
0,15 mm layer height, no support Took about 13 hours with 0,35 mm nozzle on my Felix Pro 2, using Polyalchemy PLA