Butterfly Wyvern
$3.50 Butterfly Wyvern
3D
Published 2023-04-13T22:36:39+00:00
Hello! This is a cute little Butterfly Wyvern! It features a few different versions in the zip!
- Filled wings, these versions have a thin layer in the wings for better bed adhesion and a fun semi translucent wing!
- Hole wings, these have cavities through the wing, somehwat fragile and hard to print small, but really pretty!
- Keychain versions, recommended scale is 70%
- MMU painted version, painted in Prusa for full compatability across most slicers, including Bambu.
-----------
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!
Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)
Commercial License and monthly bonus models:
Tribes
Patreon
To see all things Cinderwing3D, including all of our models (public and exclusive bonus ones) visit our website:
Cinderwing3D Website
Please see our other public models here:
The Cinderwing3D MMF Store
Check us out on our socials!
Facebook | Twitter | Instagram | Tiktok
FDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
| 发表的日期 | 13/04/2023 |
| Price | $3.50 |
| 支持自定义 | YES |
This turned out super cute … but that first joint after head looked odd so I am printing a second one to watch the beginning. Turns out it doesn’t print until the second layer. Anyone else have this issue? I’m using Prusaslicer 2.6 and it’s alpha so that could be the issue. I still love the print!