Cable holder thingy
Cable holder thingy
Published 2021-12-11T11:13:35+00:00
The cable thingies have arrived!
These little guys will grab any cable mess you have around so you better watch out!
No, really. This cable thingy can hold on to any standard EU AC power plug (or Europlug) and organize the cable that comes with it.
It is super convenient for phone chargers! but it works as well with just about any power chord or charger made to the same standard size.
We've included different sizes of the cable holding part, to suit different types of cables.
- 9 mm - USB and thinner cables (tighter fit)
- 12 mm - our standard for USB phone cables :)
- 15 and 18 mm work well with power cables of other devices. We use one with a soldering iron, an air purifier, even a laptop charger!
We look forward to seeing your prints! :)
We will add versions for other power plug standards! so stay tuned!
Follow us on Instagram
About selling our designs
Please be aware that our designs are available for free for non-commercial purposes only.
If you'd like to sell prints of one of our designs, we would be happy to discuss that with you! Please send us a message if you are interested at twothingies@gmail.com
Disclaimer
Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.
Perimeters: 3 at least
Line width: 0.42 mm
Layer height: 0.2 mm
You can use a very low infill (even 5%)
发表的日期 | 11/12/2021 |
让时间去下载 | 45 - 分钟 |
尺寸大小 | 35 x 45 x 35 mm |
支持自定义 | YES |