Camera & Battery Mount for the Blade Inductrix, Ragg-E & LynxHeli Frames
Camera & Battery Mount for the Blade Inductrix, Ragg-E & LynxHeli Frames
3D
Published 2017-05-24T15:59:01+00:00
These files provide a camera & Battery mount solution for the Blade Inductrix (the original micro kwad), Ragg-E Micro FPV, and LynxHeli spider 65 frames. The camera mount is currently tilted at 25-degrees.
I have also added a remix on Camel Kucuk & Tom Ashley Ragg-E micro motor cap too.
And as always I would really appreciate your thoughts, comments and feedback...
The kit I used
- Micro AIO Camera 5.8G 25mW https://www.amazon.co.uk/gp/product/B06XK9KX1Z/ref=ox_sc_act_title_1?smid=AP0ABZZM4QKJV&psc=1
- NewBeeDrone - BeeBrain v.1 - Micro Brushed Flight Controller - https://newbeedrone.com/collections/beeductrix-inductrix/products/the-beebrain-v-1-cleanflight-betaflight-compatible-flight-control-for-the-tinywhoop-inductrix-quad
- NewBeeDrone -BDR Gold edition brushed 6mm motor - https://newbeedrone.com/collections/beeductrix-inductrix/products/bee-dynamic-rotor-gold-edition-6x15mm-brushed-motor-set
- NewBeeDrone - NitroNectar Power - Nitro Nectar 250mAh HV LiPo Battery - https://newbeedrone.com/collections/lipobatteries/products/newbeedrone-high-voltage-nitro-nectar-210-30-60c-mah-battery
- PLA, PLA+, Flexible PLA , ABS or TPU from Rigid Ink https://rigid.ink/products/flexible-pla-1-75-mm-0-03-mm-tolerance-filament?variant=34085486279
- 14 x M1.2 mm 3mm PANS Head Screw Silver - https://www.amazon.co.uk/gp/product/B01M1CI4PA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Existing Frames
- Blade Inductrix frames £7.55 + P&P - https://www.horizonhobby.co.uk/Blade-Inductrix-Main-Frame.htm?SessionId=&a=article&ProdNr=094BLH8706&gclid=Cj0KEQjwgODIBRCEqfv60eq65ogBEiQA0ZC5-ftdY8J0-_P3PCz6qQ4jjNpS39kilN2cnSsRdI6oqNYaAsJ68P8HAQ
- Ragg-E Micro FPV £19.99 + P&P - http://www.dronejunkie.co.uk/shop/ragg-e-whoop-frame-set/
- Lynx Heli Spider 65 FPV Racer $19.95 + P&P https://www.lynxheli.com/index.php?cPath=373_367_395&osCsid=64d41eeaa5639bca63fe8c1bfe030469
Design References
- Blade Inductrix the Orignal Micro Kwad -http://www.bladehelis.com/Inductrix/
https://www.dronejunkie.co.uk/shop - Microdure - https://www.facebook.com/Microdure/
- Tom Ashley - Ragg-E Micro FPV - http://www.ragg-e.co.uk/micro-quad-frames
- Lynx Heli Spider 65 FPV Racer - https://www.lynxheli.com/index.php?cPath=373_367_395&osCsid=64d41eeaa5639bca63fe8c1bfe030469
- jem@dronejunkie.co.uk - Motor Mount Design Inspiration Micro Drone Specialist for; drones, spare & good advice.
Remix from https://www.thingiverse.com/thing:1947924
I would like to suggest you use Rigid Ink https://rigid.ink/products/flexible-pla-1-75-mm-0-03-mm-tolerance-filament?variant=34085486279
If you are using www.rigid.ink then following settings apply
Print at: 190 to 210 degrees celsius
Heated bed: 40 to 60 degrees celsius
Notes: Adheres well to Buildtak bed https://www.buildtak.eu
Felting
Once the parts are printed drill out all of the screw holes using a 1mm drill, and the motor holes with 6mm drill. It is always a good idea to trim or clean the rough edges off any model, especially a 3D printed one...
| 发表的日期 | 24/05/2017 |
| 打印工艺 | FDM |