Char B1 Bis 1940 (6mm & 10mm)
$4.99 Char B1 Bis 1940 (6mm & 10mm)
Published 2024-01-02T16:16:14+00:00
The Char B1 Bis was a heavy battle tank serving in French army during the battle of France. Being a pre war design based around infantry support the Char B1 boasts thick armour and a powerful 4.7cm gun for the time resulting in a real problem for German panzer platoons entering France in May 1940.
These STL's represent the Char B1 Bis.
Variants include a command Hull & Turret so you can print an entire platoon of 5 tanks that do not look the same.
These models have been designed at 6mm to give a balance between detail & reliability for both the printing and gaming. They also scale up to 10mm nicely so I have included these too.
This STL pack Includes
6mm (1/285)
5x 6mm Hull Variants both supported and unsupported.
5x 6mm Hull variants with basing Tabs under tracks both supported and unsupported.
3 x 6mm Turret Variants both supported and unsupported
10mm (1/160)
5x 10mm Hull Variants both supported and unsupported.
5x 10mm Hull variants with basing Tabs under tracks both supported and unsupported.
3 x 10mm Turret Variants both supported and unsupported
Bases
1x 50mm x 25mm Bases both supported and unsupported
Tabs
Models are supplied in both normal and ‘tabbed’ variants. These Tabs allow you to base these vehicles and still have some room for basing material before you start to cover up the tracks. They also strengthen the model support options.
I would recommend printing these at 0.02 to 0.025 layer height. I have test printed these models on a 4k Printer, so results on a 2k printer may vary.
发表的日期 | 02/01/2024 |
Price | $4.99 |