CUTE RETRO TOASTER SOAP DISH!!! EASY TO PRINT!!!!!
$3.25 CUTE RETRO TOASTER SOAP DISH!!! EASY TO PRINT!!!!!
3D
Published 2022-06-13T09:25:27+00:00
***NOTE: Copyright PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE:***
https://www.patreon.com/PA1_MAKER
Yes, Its another soap dish, super easy to print and 100% support free!!! But this one is one of the cutest in the 3dp world!!!
This time, in the shape of a retro toaster! Round lines, lovely design and can be made in any color you wish, because its multi parts.
-Two wide slots for your prefered soaps, or her/his soap.
-100% support free
-Multi parts, so no need for color change or any slicing setup. Just print the parts in the color you want and you're done!!!!!
The top part is a "shell" which doesnt require too much filament and prints faster than a solid body with infill. No supports are required.
The base is removable for an easy cleaning and the soaps are above the bottom dish, keeping them clean and not soaking.
Note: This soap dish can also be use for cleaning sponges. But you will have to scale it up. Same thing for larger soaps.
As a reference: Openings are 25mm x 60 mm. Just scale all the parts to the ratio you want.
*** NO INSTRUCTIONS, REALLY SIMPLE: GLUE ALL THE PARTS (BUTTONS, SLIDER, TRIM AND SIDE PLATE) ONTO THE TOP PART. DO NOT GLUE THE BOTTOM DISH (file called "base") TO ANYTHING***
BUTTONS: YOU WILL NEED TWO
SIDE PLATE: YOU WILL NEED TWO.
For the side plates, the text is made with a color change. So print the bottom of the plate in white and make a color change at the correct layer for the text.
For any questions: Send me a message! I will be happy to help you!!!! :)
3D PRINTING SETTINGS
3 walls for strong parts.
Good bridge/overhang settings
For the best results: 0.2 layer height or smaller.
Infill: There's almost none. So 10% is way enough for this project.
You may need a brim for really small parts, like the buttons.
| 发表的日期 | 13/06/2022 |
| Price | $3.25 |
| 支持自定义 | YES |