diatone roma f5 v2 skin
diatone roma f5 v2 skin
3D
Published 2022-10-14T13:42:20+00:00
These are some parts for the diatone roma f5 v2 frame. These are designed to fit the bind and fly kit from getfpv. I usually use the caddex ant camera but this camera mount is for a runcam. The camera mount supports and protects the camera while providing three locations for mounting the camera deeper into the frame. Also on the camera mount is a slot for the single row programable led strips available on amazon. The led strip slides in and is held secure. The fc guards fit the diatone roma frame and electronics. There is a slot for running the power plug though which holds it captive and protects it from being chopped in a crash. There are two buttons on the mamba fc, this is the fc with wifi. One of the buttons is bootloader and the other controls the leds if the board is in mamba mode. Whats nice is the buttons can be felt and maipulated through the tpu guard. keep grass out of your electronics and dont sacrifice convenience. There is also a port for usb. I have other parts designed for this frame but these are what I fly.
Print in tpu, I recomend .05 nozzle. Parts are designed in inches, if they show up tiny in your slicer then multiply the scale by 25.4 in xy and z. The camera can be oriented a few ways but the way I printed mine. Hot end 200, bed temp 65, speed 40, fan 80%
| 发表的日期 | 14/10/2022 |
| 让时间去下载 | 130 - 分钟 |
| 材料数量 | 18 |