Diesel Loco for 16mm Scale Garden Railway
Diesel Loco for 16mm Scale Garden Railway
3D
Published 2017-05-15T18:03:07+00:00
A Diesel Loco for your Garden Railway 32mm or 45mm gauge.
This is not the easiest model to print, you need support on some objekts and a well calibrated printer, but it is printable on a budget printer.
You can make the loco as a display Model or you can equip it with a motor and R/C gear for you garden railroad.
It is perfect for Kitbashing your own loco if you want to do that.
A PDF Manual is included.
The Loco on all pictures are printed with 0,2 mm layer height and 20 % infill.
All STL files are checked with Netfabb and test printed on 3 different printers
2017-09-23
Fixes some errors on frame_2.stl , it was still printable on most printers, but this file should be even easier to print , old version removed and the new version is frame_2_v2.stl
2018-04-16
A new version off Frame_1b is released, this version are more rigid than the original file,
I will leave the original file but i recommend you to use "Frame_1b_V2", If you use your own chassie then it is faster to print the original file.
| 发表的日期 | 15/05/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |