Donkey Kong (1981) level - with magnets !
Donkey Kong (1981) level - with magnets !
3D
Published 2017-03-27T18:45:33+00:00
For a video-game themed exhibition we reproduced a level of the Donkey Kong game from 1981.
Most of the level pieces (ladders / plateforms) are meant to be glued on a magnetic panel.
Other pieces have a round hole in the back, in which you can put a 10x3mm round magnet.
This way you can put every character as you'd like, kids are loving it !
Each STL has to be printed once except :
-double_barrel that goes in the top, to be printed twice
- flames and rolling_barrel : you can print as many as you wish !
Then use the picture, on a screenshot of the game, to know how to properly assemble.
Pro Tip : Jumpman / Lady / Flames / Donkey Kong are designed so that if you pause the print at the right time and change filament, you can achieve a nice multicolor print even with a single head printer.
For the magnetic plate, we used a 30*30cm one that we've found for around 10€ in a office material shop near us. It looks nicer with a black one of course.
Have fun !
| 发表的日期 | 27/03/2017 |
| 让时间去下载 | - 360 分钟 |
| 尺寸大小 | 100*100*10 |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |