Drink Koozie
Drink Koozie
3D
Published 2020-02-24T21:05:14+00:00
This is a printable, foldable koozie that will keep your beverage of choice cold or warm. There is a plain version, a version with my logo, and a version with a space for a logo so you can add your own brand if you want.
They're intended to be printed in TPU. I've had success with hardnesses 95a and above, but that will vary with your hardware.
For the plain koozie:
At a 0.4mm linewidth, print the part with two walls and no infill. Set your bottom and top layers to give you a thickness of 2mm. That will insure that the tob and bottom rim are solid and that the hinge on the bottom will print correctly.
For the branded versions:
The top/bottom layer thickness runs into some trouble in the shield and logo area. To get around this I followed the instructions here: https://youtu.be/su_m5zV9rvA?t=123
Using the technique in the video above I created 2mm tall areas at the top and the bottom of the model that had custom settings to print at 100% infill. Outside of those two areas printing with two walls and no infill worked just fine.
| 发表的日期 | 24/02/2020 |
| 支持自定义 | YES |