Element Knightrunner Bed Rack
Element Knightrunner Bed Rack
3D
Published 2021-12-02T09:21:55+00:00
These are the files for my itteration of the upTOP Overland Truss bedrack system for the Element Knightrunner RC car. It was modeled to match the true bed rack as closely as possible.
To print this, you need to print 3 of the truss legs (in either mid, or mid-tall, your choice) laid flat on the printer, print two sets of the side panels, with one set being rotated 180 degrees so the same finish can be shown on the outsides of the bed rack. Everything attaches with M3 x 6mm hardware, which is the only thing you'll need to purchase for this.
This was originally designed just to fit the Knight Customs drop bed, but with some modification can be made to fit the standard lexan bed as well.
If you have any questions regarding this, please feel free to message me here, and I'd be glad to assist.
Printer Settings:
- Stock Ender 3
- Iemai Carbon Fiber PLA
- 200* Nozzle Temp
- 50* Build Plate Temp
| 发表的日期 | 02/12/2021 |