English Heritage Desktop Park Bench
English Heritage Desktop Park Bench
3D
Published 2014-06-09T13:42:58+00:00
A 3D printable English Heritage park bench for your desk.
English Heritage (officially the 'Historic Buildings and Monuments Commission for England') exists to help people understand, value, care for and enjoy England's unique heritage. It is an executive non-departmental public body of the British Government, sponsored by the Department for Culture, Media and Sport.
They are probably best known for looking after the National Heritage Collection of historic sites and monuments, and the guardianship of over 500,000 objects and 12 million photographs in public archives.
The Collection ranges from prehistoric stone circles to a 1960s nuclear bunker and includes Stonehenge and Hadrian's Wall, Charles Darwin's diaries and the Duke of Wellington's boots. Taken together, over 400 properties make up English Heritage. - english-heritage.org.uk
File contains four STLs - two are the sides of the bench and the others are the slats, one of which has the logo. Print the blank slat x 7, and the other pieces x 1. I recommend using the "Number of shells" set to zero again and the bench slats can be printed directly to the print bed without support structure. That way the pegs will fit nicely. The sides of the bench will need support structure again. Total print time with 0.10 layer height, and 20% infill is approx. 2hr 25min. The entire bench uses 16g filament approx.
| 发表的日期 | 09/06/2014 |
| 让时间去下载 | 145 - 145 分钟 |
| 材料数量 | 16g |
| 尺寸大小 | 110 x 50 x 45 mm |
| 复杂程度 | 中级 |