Flat Screen Monitor VESA Mount 100mm
Flat Screen Monitor VESA Mount 100mm
3D
Published 2019-07-10T06:45:27+00:00
I needed to mount some monitors to the wall but i wanted them to stay as close to the wall as possible while still using standard hardware and spending as little filament as possible.
This is what came out.
Print:
4x vesa-mounting-screw-holder.stl
1x vesa-100mm-holder.stl
You'll need:
4 x M4x25mm screws
2x 8mm wall anchors
2x 4.5x30mm "wood" screws (or longer screws, but 30mm is the minimum lenght)
Optional:
2x M3x30mm screws
2x M3 Nuts
You'll need the M3 hardware only if you want to adjust any of the sides height individually, in case you didn't install the 2 attachment screws to the wall leveled.
My monitor weights about 4kg and it holds rather fine, i feel that the weakest part of the assembly are the M4 screws themselves, the mount is very solid.
Print with 4-5 perimeters or more for strenght, i recommend printing with ABS or PETG, but i think PLA will work just fine.
| 发表的日期 | 10/07/2019 |
| 让时间去下载 | - 90 分钟 |