Forza Horizon 5 Festival Garage Display Base (LCD Models Mclaren 600LT)
Forza Horizon 5 Festival Garage Display Base (LCD Models Mclaren 600LT)
3D
Published 2022-02-26T10:29:16+00:00
Description
A base for LCD Models Mclaren 600LT, it should fit all other colour variant LCD Models released. I made this display base because LCD Models arcylic box came in non standard size and would not fit in my protector box: Here
The display base is design based on Forza Horizon 5 festival garage theme. The box back is based on the walls of the festival garage, the stats list is a slightly simplified version of the in game car stats.
If you wish to have a Forza Horizon 5 festival garage display based on a different car available in game, I could edit the files to fit that. Just contact me on Twitter, Instagram or here on Thingiverse through comments or direct message.
The display base is separated into 4 main parts for easy printing and colour swap. The parts are:
1) Name tag (NameTag2.STL)
2) Base (BaseV3.STL)
3) Base back wall (BoxBackFlat.STL)
4) Car stats (Inside "Stats list" folder, the car stats is split into 5 files)
- 01 Plain.STL
- 02 CarPrice.STL
- 03 Epic.STL
- 04 RWDBox.STL
- 05 S1Box.STL
Box Back Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on both BoxBackFlat:
1) Start (Bottom half of background colours, mine is in white)
2) Layer 15 (Pattern on white boxes and top half background colour, mine is in black)
3) Layer 20 (Small rolls of square pattern on top half, mine is in grey)
4) Layer 26 (Triangle pattern colours, mine is printed in white and coloured with brown marker pen)
5) Layer 30 ("Horizon" logo background colour and "5" lettering colour, mine is in red)
6) Layer 35 (Forza logo, "Forza" and "Horizon" lettering colours, mine is in black)
Name Tag Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
1) Start (Background colour/base colour, mine is in white)
2) Layer 6 (Lettering colours, mine is in black)
CarStats Print Settings
Nozzle size = 0.4 mm (minimum)
Layer height = 0.2 mm
01 Plain.STL Layer Change
1) Start (Background colour, mine is in grey)
2) Layer 6 (Stats lettering colour and "track toys" logo background colours, mine is in white)
3) Layer 11 ( "Toys" lettering colours, mine is in red)
02 CarPrice.STL Layer Change
1) Start (Background colour, mine is in yellow)
2) Layer 11 (Car price lettering colours, mine is in black)
03 Epic.STL Layer Change
1) Start (Background colour, mine is in purple)
2) Layer 11 ("Epic" lettering colour, mine is in white)
04 RWDBox.STL Layer Change
1) Start (Background colour, mine is in white)
2) Layer 11 ("RWD" lettering colour, mine is in black)
05 S1Box.STL Layer Change
1) Start (Background colour, mine is in purple)
2) Layer 11 ("S1" lettering colour and number box background colour, mine is in white)
3) Layer 16 ( "868" lettering colours, mine is in black)
Assembly
The car is screwed on to the display base using the same screw the car comes with.
Stat list will need to be printed piece by piece and glued on later on, I did it this way for this one is due to too many colours required on the display base and my usual colour change based on height would not work well.
Back plate, Name tag and stat list should fit in nicely into the display base. It is recommended to use some double sided tape to have the name tag and stats list secured nicely.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
| 发表的日期 | 26/02/2022 |
| 支持自定义 | YES |