Great White Shark, Print-In-Place Body, Snap-Fit Head, Cute Flexi
$3.48 Great White Shark, Print-In-Place Body, Snap-Fit Head, Cute Flexi
3D
Published 2023-01-28T23:05:00+00:00
Introducing the articulated Great White Shark! This fella looks like he's up to something. I hope you enjoy!
This model is Pre-Supported *(no added supports required).*
Here is a quick video showing how to remove the Pre-Support and snap-fit the head onto the body (demo'd on the Leopard Gecko): https://youtu.be/IIBjZ6EOQGE
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
Includes 2 files:
- Body: Print-in-Place. No Supports needed
- Head with Pre-Support: Supports are built into the model. Snap them off when complete. ***No Additional Supports Needed.***
*Good bed adhesion is a must for successful printing. If you have bed adhesion trouble, I suggest a brim. I use a 0.25mm Brim Gap to make removal easier, but you may have to experiment finding what works best for you.
- 5%-15% Infill.
- 3 Walls.
This model has been successfully printed down to 70%. Below that the joint function may start to become compromised. YMMV
| 发表的日期 | 28/01/2023 |
| Price | $3.48 |
| 打印工艺 | FDM |
| 支持自定义 | YES |
Printed at 150% with matte pla