GURUGURU - SWIRL FUNNEL
GURUGURU - SWIRL FUNNEL
3D
Published 2021-12-28T13:20:35+00:00
DESIGN DESCRIPTION:
GURUGURU - named after Tobi from Naruto; has been designed to provide angular momentum which accentuates the Coriolis force (an apparent force that as a result of the earth's rotation deflects moving objects Counter - Clockwise in the Northern Hemisphere and Clockwise in the Southern Hemisphere). The funnel has a unique mesh midway which further accentuates the swirling motion of the liquid exiting the funnel.
DESIGN VIDEO:
There are separate files for each hemisphere, please select accordingly. (For more info check out the photo containing the map of the globe.)
NOTE FOR COUNTRIES ON THE EQUATOR = according to the principle of Coriolis force, for countries on the equator there should not be any spin when the liquid is draining away. Therefore depending on which of the files you print there maybe a slight spin due to the design of the funnel which forces the liquid to spin, but I am curious to know what the actual findings will be.
Since I reside in the Northern Hemisphere I could only test one of the designs. I would love to see your findings.
Tusen takk!
Watch the following video for more info about Coriolis Force:https://www.youtube.com/watch?v=mXaad0rsV38
Resolution Profile - 0.2mm Quality
Material - PLA/PETG/ASA/ABS etc. ( Depending on your end usage conditions)
Perimeters - 2
Infill - 15-100% (Depending on your end application, although the printing time difference between the both is 30 minutes).
Supports (please select “for support enforcers only”) - Paint-on-Supports - Select the Mesh Face ( Check the photos for more info)
| 发表的日期 | 28/12/2021 |
| 让时间去下载 | 377 - 分钟 |
| 材料数量 | 55 |
| 尺寸大小 | 103.76 X 91.9 X 115 |
Video Link: https://vimeo.com/660767302 This make is by Rachel Makes and has been taken from prusaprinters.org with permission. Website Link: https://www.prusaprinters.org/prints/104742-guruguru-swirl-funnel/comments