Hear Me Out Maze Puzzle
Hear Me Out Maze Puzzle
Published 2018-05-21T10:12:40+00:00
As the design is printing, I took a 6mm ball berring (slingshot ammo) and plopped it into one of the cavities. Now, the only way to get the ball out of the cube without breaking the cube, is to roll the ball through the internal maze and listen for clues. I have attached an image of the internal structure which could either be printed on paper as a clue, or if you're feeling generous, you could try to 3d print the internal structure as a clue (I have not tried printing the standalone internal structure, if/when I do, I will upload the .stl file and pictures of that as well).
This design is the first in a series of designs I'm working on to create puzzle games that require the gamer to rely on their sense of hearing, touch, and spacial visualization. As the first in the series, this design tests some of the boundries that I knew would be part of other designs and as such this puzzle is EXTREMELY difficult. This is a perfect gift to give to that special someone in your life who thinks they can solve any problem.
A note about the ball berring. You could 3d print a 6mm sphere, or use a 6mm marble if you do not have this part. Just be sure that the gap you're dropping it into mid-print has enough clearance that it will not interfere with the new layers. Another way to go about this is to wait until the print is completely finished, then put the ball in, but this will likely decrease the effectiveness/difficulty of the puzzle.
Note about print settings: The only one that is crucial here is not to use support. The others, such as infill pattern or density can be altered which will affect the degree of difficulty for the puzzle.
Layer Height: .18mm
Initial Layer Height: .27mm
Wall Line Count: 2
Top/Bottom Layers: 3
Z Seam Alignment: Random
Infill: 15%
Infill Pattern: Cubic Subdivision
Printing Temp: 205C
Build Plate Temp: 45C
Filament Diameter: 1.75mm
Print Speed 60mm/s
Outer Walll Speed 30mm/s
Travel Speed 80mm/s
Initial Layer Print Speed:20mm/s
Initial Layer Travel Speed: 70mm/s
No Support used
Build Plate Adhesion: Raft (.324mm thickness)
发表的日期 | 21/05/2018 |
让时间去下载 | 20 - 5 分钟 |
材料数量 | 200 |
尺寸大小 | 90x90x91 |
支持自定义 | YES |